Bizhub C353 nvram tool

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • copier tech
    Field Supervisor

    5,000+ Posts
    • Jan 2014
    • 7931
    #1

    [Dead] Bizhub C353 nvram tool

    Hi,

    I wonder if someone can help.

    We need to repair an old C353 but need the NVram tool, however KM UK have stopped supporting this model! bizarrely the C203 is still available.

    Does any of you guys "over the pond" have this file you could share!?
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk
    ​
    Tags: c203, model, nvram, stopped
    • Synthohol
      Certified Konica Expert

      Site Contributor
      5,000+ Posts
      • Mar 2016
      • 5458
      #2
      Re: Bizhub C353 nvram tool

      ck ur pms
      We know a thing or two because we've seen a thing or two.
      The medication helps though...

        Comment

        • hmdy75
          Junior Member
          • Feb 2020
          • 2
          #3
          Re: Bizhub C353 nvram tool

          Any posibalitie that someone could share this tool with me.

            Comment

            • Synthohol
              Certified Konica Expert

              Site Contributor
              5,000+ Posts
              • Mar 2016
              • 5458
              #4
              Re: Bizhub C353 nvram tool

              there have been too many times someone has inquired about the reset tool just because they want to zero the meters and resell the machine.
              its a knee jerk reaction. why do you need the reset tool? anyone that is remotely qualified/trained to use it should already have access to KM dealer site to download it themselves.
              especially when someone posts for sale a fraudulent device to enable just that.
              Originally posted by Synthohol
              Anytime a piece of software or hardware has the ability to accidentally or intentionally cause the meters and counters to revert to zero must and will be scrutinized for the reasons I've given.
              Even with the best intentions accidents happen and a machine can be bricked.
              The reset tool is never to be taken lightly and it needs to be a last ditch effort procedure only on the most dire circumstances.
              With that being said please understand why we are so critically sceptical of requests coming from users that haven't been on the forum for a while and have demonstrated their qualifications to perform such a procedure.
              It is never taken lightly.
              sorry, we dont know you.
              We know a thing or two because we've seen a thing or two.
              The medication helps though...

                Comment

                • hmdy75
                  Junior Member
                  • Feb 2020
                  • 2
                  #5
                  Re: Bizhub C353 nvram tool

                  Yes I'm new to this community and also I'm new to this carrier.
                  Could you help me please.

                  I have bizhub c353 and after I read a lot of threads I think it requires a firmware which I can't find and don't know how to install it.

                  The problem that the photocopier stuck at the Kronika icon.
                  I tried replacing NVROM from different and broken model.
                  I was able to start the photocopier but I was unable to enter the service mode and unable to do anything. Also it requested HD password.
                  Last edited by hmdy75; 02-15-2020, 12:00 AM. Reason: Give more details

                    Comment

                    Previous template Next
                    Working...