C458 with FK-514

[tsbservice]

Re: C458 with FK-514

Just the fact that someone get lucky is NOT a part of my practices.
I prefer to stick to setting right HEX Assignment in SW25, it takes like 30 seconds.

[emujo2]

Re: C458 with FK-514

You can have a MFP at W5 and the function version as far back as you want (with the exception of firmware releases that include a mandentory function change)..The new firmware addresses problems while the function verison add new features and can also remove some items. E

[kenpio]

Re: C458 with FK-514

Yes I found it in the firmware pdf, it is just way at the bottom. I will pay more attention to this in other firmware updates. I will go to the customer and change this. I am happy that this customer is not 2 hours away and it is a couple miles down the street.

Thanks
KEN

[kenpio]

Re: C458 with FK-514

So I went to the customer and switched 25 to B0. Before I did this the customer said that it was printing slow. Would this help that? You were talking of weird problems. They did print after I did this and it seemed okay to me.

Thanks
KEN

[Synthohol]

Re: C458 with FK-514

it definitely didnt hurt anything.

[srvctec]

Re: C458 with FK-514

So I went to the customer and switched 25 to B0. Before I did this the customer said that it was printing slow. Would this help that? You were talking of weird problems. They did print after I did this and it seemed okay to me.

Thanks
KEN

Did you power off the main power switch after changing SW25 to B0? If not, the new changes afforded by that setting will not be realized. Also, the Pagescope web interface won't work properly until you power cycle the machine after changing SW25.