Bizhub454e emulation error

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • patrickjlc
    Trusted Tech

    100+ Posts
    • Feb 2015
    • 212
    #1

    [CQ] Bizhub454e emulation error

    I have this 454e connevted to a windiws pc, that copies fine, can fax normally, but when trying to print it comes up as error. Shows emulation error.
    Machine has been reset to factory by a Konica rep that sold me the machine.
    I tried to reinstall the drivers, using latest available. Firmware has been updated too.

    If it can't print it is as good as a doorstop.

    Any ideas? Thanks.

    Sent from my SM-G930V using Tapatalk
    Tags: None
    • Synthohol
      Certified Konica Expert

      Site Contributor
      5,000+ Posts
      • Mar 2016
      • 5456
      #2
      Re: Bizhub454e emulation error

      what kind of file? .pdf, .ps, .idd??
      the exact driver name/version?
      printing to IP or something dumb?
      We know a thing or two because we've seen a thing or two.
      The medication helps though...

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22696
          #3
          Re: Bizhub454e emulation error

          Have you looked at the emulation settings in the printer and in the driver? PCL, PS, XPS?
          If the machine is set to PCL you cannot use a PS driver. Please look. =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            • mearmi
              Trusted Tech

              Site Contributor
              250+ Posts
              • Oct 2010
              • 344
              #4
              Re: Bizhub454e emulation error

              Originally posted by patrickjlc
              I have this 454e connevted to a windiws pc, that copies fine, can fax normally, but when trying to print it comes up as error. Shows emulation error.
              Machine has been reset to factory by a Konica rep that sold me the machine.
              I tried to reinstall the drivers, using latest available. Firmware has been updated too.

              If it can't print it is as good as a doorstop.

              Any ideas? Thanks.

              Sent from my SM-G930V using Tapatalk

              Which driver installed? PCL6?

              Try to put on stick and print from the machine as a test..

              Also check the Account Track is off?

                Comment

                Previous template Next
                Working...