Re: C-3350i, not recognizing TRAY 2...
fw45 is very glitchy and probably your issue do not use 4a ever either. get latest and update without the added tray.
C-3350i, not recognizing TRAY 2...
Collapse
X
-
Re: C-3350i, not recognizing TRAY 2...
Sensor or actuator is broken in the tray.
Sent from my SM-N960F using TapatalkLeave a comment:
-
C-3350i, not recognizing TRAY 2...
Checked all the usual stuff, including the connector at rear bottom, unplugged and replugged. This machine has been glitchy from the beginning and I'm hoping I didn't sell a complete lemon. F/W is at -45. Will check into that next. Never was able to set the copy screen to default BLACK from Color...
OC
Leave a comment: