Re: C454e air print function
Great! thanks for the feedback!
C454e air print function
Collapse
X
-
-
Re: C454e air print function
thanks for sharing , i will try and update soon ...Leave a comment:
-
Re: C454e air print function
I would also update to the latest firmware version GDN-M1
Bizhub 4e Series - AirPrint Additional Information.pdfLeave a comment:
-
Re: C454e air print function
yes i follow the step ,but still no air print function at page two . now i blur.....Leave a comment:
-
Re: C454e air print function
In CE mode System 2 > Software Switch Setting>Switch 25 set to HEX 60.
Reboot then you will have the AirPrint option in admin mode. (its off by default)
SW 25 to HEX 60.pdfLeave a comment:
-
Leave a comment:
-
Re: C454e air print function
These older models were not the best for mobile printing. See attached. Hopefully there is something in there that may help you.Leave a comment:
Leave a comment: