RF Firmware

[AlaskaCopyTech]

Hey guys,
I have seen a lot of people talking about RF firmware but I cannot see it on onestop. Is RF a limited release? Right now we have been using GG3-RE for our A3 mfps.

[copier tech]

This is the latest version released end of last year.

Firmware Readme C250i C251i C300i C301i C360i C361i G00-RF.pdf

[KMFLT3CH]

Hey guys,
I have seen a lot of people talking about RF firmware but I cannot see it on onestop. Is RF a limited release? Right now we have been using GG3-RE for our A3 mfps.

GG3-RE is what we're using in the states especially with the big push to use RSP Wizard at new installs for remote vcare/vcare+ setup.

I believe RF should be released for us any day now.

[Duplicator]

+1 to what KMFLT3CH said.

Different regions get different firmware releases. It appears Japan gets all of them, the EU most of them, and the US very few of them. I don't have any data to back that up but that's what it SEEMS like as an observer.

[rolls.bo]

In Italy we use the RF version since November 2024 DLKM_BT2415515EN

[Duplicator]

In Italy we use the RF version since November 2024 DLKM_BT2415515EN

Over here in the states the latest "base firmware" Konica released is from August 2024 (G00-RE). We have had some special firmware released too but nothing newer than RE.

[Max]

I belive there will be another one coming out in April/May. The one after RF. Its possible US will get RF after that.

[rolls.bo]

I share your idea ..........there are always new firmwares......if you need let me know
byeeee

[tsbservice]

RE or RF there's nothing special between those.
GC3-RE is the one we push for the last 2 months.