Konica minolta 454 and 364

[iraklis7302]

HELLO SIR!!,

my machines have 2 problems and i dont know what it is.First my 454 has faded colors on the lower at the page as you can see in my photo.
and my second machine 364 has small angle lines only at my magenta color almost on every part on page as you can see in my photo.

thank you all in advance

[Konicatech]

Re: Konica minolta 454 and 364

Hi

Your magenta dev unit needs to be replaced.

[iraklis7302]

Re: Konica minolta 454 and 364

Hi

Your magenta dev unit needs to be replaced.

Hi, i have allready replaced it with a new one last week

[xerotec]

Re: Konica minolta 454 and 364

HELLO SIR!!,

my machines have 2 problems and i dont know what it is.First my 454 has faded colors on the lower at the page as you can see in my photo.
and my second machine 364 has small angle lines only at my magenta color almost on every part on page as you can see in my photo.

thank you all in advance

On the first 454 machine clean mirrors of polygon motor on laser unit, on second is magenta dev unit.

[iraklis7302]

Re: Konica minolta 454 and 364

On the first 454 machine clean mirrors of polygon motor on laser unit, on second is magenta dev unit.

ok thank you so much!i will do it

[blackcat4866]

Re: Konica minolta 454 and 364

What do these images look like?:

[tsbservice]

Re: Konica minolta 454 and 364

On the first 454 machine clean mirrors of polygon motor on laser unit, on second is magenta dev unit.

+1

[iraklis7302]

Re: Konica minolta 454 and 364

What do these images look like?:

these images are good in my 454,i found that the problem is when i print double sided.only my first side is good

[iraklis7302]

Re: Konica minolta 454 and 364

Hi

Your magenta dev unit needs to be replaced.

probably my high voltage unit board need to be replaced.th developer was changed last week,but because of high voltage board ,the dev unit was damaged

[kingarthur]

Re: Konica minolta 454 and 364

Hi, i have allready replaced it with a new one last week

are there any units "beyond life" especially drums, if you don't replace them, you'll just keep replacing the dev unit

[blackcat4866]

Re: Konica minolta 454 and 364

these images are good in my 454,i found that the problem is when i print double sided.only my first side is good

Just out of curiosity, have you tried fresh paper? High humidity in the paper can cause poor transfer ... but it's the first side that comes out faint. The fuser dries the paper somewhat, making the second side look better. =^..^=