C-450i Firmware

[CP-1015]

According to the diagnostic tool is the SSD OK. If boot problems still occur (50%), download the firmware. Can someone please send me the appropriate firmware? Thanks!

[copytechtrouble]

change the CPUB. its the CPUB!

[CP-1015]

Great, the customer will be happy.

[CP-1015]

Edit: Isn't there a special firmware for strangers SSD? I'm not shure but think colleage has switsched the SSD.

[copytechtrouble]

yes sorry, if the SSD was changed with a new one it may need to have the boot rom updated. try that first before changing the CPUB.
I've attached the bulletin with details on how to update the boot rom.

[CP-1015]

Now I know; SSD is original. Is it helpull to try another SSD because the SSD destroys the CPU? Is a bootrom update even possible with the attached screen?
Is the CPU available anywhere outside of Minolta? Many questions, thanks a lot.

[Max]

Update boot and storage controller regardless. Even the updated Diagnostic/recovery tool doesnt detect CPU board failure unfortunatly.

[copyman]

Now I know; SSD is original. Is it helpull to try another SSD because the SSD destroys the CPU? Is a bootrom update even possible with the attached screen?
Is the CPU available anywhere outside of Minolta? Many questions, thanks a lot.

Hytec dealer services, Orlando FL, you can send CPU in for repair, exchange or buy outright

[CP-1015]

Update boot and storage controller regardless. Even the updated Diagnostic/recovery tool doesnt detect CPU board failure unfortunatly.

How can I do? With F000-GXX-34(00) and F231-G00-RE(00) it seems impossible.

[CP-1015]

Hytec dealer services, Orlando FL, you can send CPU in for repair, exchange or buy outright

Thanks, but I'm from Germany. And I thought it''s a normal computer cpu. But I can't find it anywhere. CPUs are usually located on the motherboard.

[CP-1015]

Is cpu board non standard board?

[Max]

How can I do? With F000-GXX-34(00) and F231-G00-RE(00) it seems impossible.

If the copier restarts every 10 second then you cant. If it doesnt boot up then Insert the latest firmware and follow Copytechtrouble advice.

The cpu board is non standard unfortunatley.

[CP-1015]

If the copier restarts every 10 second then you cant. If it doesnt boot up then Insert the latest firmware and follow Copytechtrouble advice.

The cpu board is non standard unfortunatley.

I don't get the display Copytechtrouble showed, it stops at display from #6.

[CP-1015]

Firmwareupdate with F231-GG3-RB was successfull. CD-313, Datarecovery. Issue solved. I hope not only in the moment.

[DeWalt_Man]

Firmwareupdate with F231-GG3-RB was successfull. CD-313, Datarecovery. Issue solved. I hope not only in the moment.

lucky, cpu boards are really expensive and hard to get if ur not a dealer.

if you get the issue again, hold the standby button during boot and check the attatchment. it shows the boot process and shows how to solve issues when booting.