User Profile
Collapse
-
i would check out the guide that femaster posted above and see if it helps but in my experience this issue, on this range of machines (0i) is almost always...👍 1 -
just to follow up on the above post.
yes indeed it was the printhead/laser unit that was the problem. swapped it out with new one and all is good....👍 6Leave a comment:
-
"Cleaning in Progress..." ineo+ 250i
Hello all,
I'm just checking if anyone else has had this issue with last gen ineo+ 250i machines.
Brand new out of the box it will... -
thanks for the quick reply.
ill check the connections and try a printhead. ill report back when i know more....Leave a comment:
-
ineo+ 251i magenta all over the page
Hello all,
I have a relatively new (10k+) ineo+ 251i on RF firmware.
As the pic shows, it's printing magenta all over the page.
So... -
swapping in a used CPUB will throw up a CD072 Error. i think there is a way to reset the CPUB but i don't know how. maybe someone will let us know ho...Leave a comment:
-
you don't need a new fuser.
you can remove the front roller by removing the white plastic C clip on the right hand side.
with the C clip...Leave a comment:
-
check the paper tray settings in the menu. it may be set to the wrong paper size....👍 1Leave a comment:
-
I'm open to correction but they have different fusers but the rest of the parts are compatible, drums, belts and toners.👍 2Leave a comment:
-
so you got an App Password from google?
the app password is displayed with spaces in between every 4 characters to make it easier to read but the...Leave a comment:
No activity results to display
Show More
Leave a comment: