BH-C-3110, which SMB protocol

[Hansoon]

Which is the highest SMB protocol the BH-C-3110, can do?

Never did FW update on these beauties. I have mainA6DT30GJD01-951.prn, is it easy to do?

Hans

[Ziggy]

From what I can find looks like SMB 2 is the highest this machine can do . You also need the latest Controller Firmware , which is Controller Firmware Version Release 9. I can send that as well as the latest main which is A6DT30GND01-951.
Looking at the read me and reaching in to the cobwebs of my memory it looks lie you will need to load firmware in a specific order . bizhubC3110 Cont_A6DT30G0D00-899.exe > bizhubC3110 Cont_A6DT30G0D00-999.exe> bizhubC3110 Cont_A6DT30GJD01-899.exe> bizhubC3110 Cont_A6DT30GND01-951.exe. Below is from the KM site. I can send you any and all files you want as well as the manual if you want it

Version A6DT30GND01-951

3/24/2021 67.91 MB bizhubC3110 Cont_A6DT30GND01-951.exe Release Notes: bizhub C3110 FW ver. main: A6DT30GND01-951 Support for enabling LDAP channel binding. SEE DLKM_BT2111806EN

3/24/2021 146 KB DLKM BT2111806EN_01.pdf Release Notes: bizhub C3110 FW ver. main: A6DT30GND01-951 Support for enabling LDAP channel binding. SEE DLKM_BT2111806EN

Version A6DT30GLD01-951

11/30/2020 67.91 MB bizhubC3110 Cont_A6DT30GLD01-951.exe Release Notes: bizhub C3110] [FW ver. main: A6DT30GLD01-951] Black band at the edge of the paper occurs when printing a job from SAP. SEE DLKM_BT2021198EN

11/30/2020 145 KB DLKM BT2021198EN_01.pdf Release Notes: bizhub C3110] [FW ver. main: A6DT30GLD01-951] Black band at the edge of the paper occurs when printing a job from SAP. SEE DLKM_BT2021198EN

Version A6DT30GJD01-951

8/26/2019 67.91 MB bizhubC3110 Cont_A6DT30GJD01-951.exe Release Notes: bizhub C3110 FW ver. main: A6DT30GJD01-951 - AirPrint setting becomes invalid after updating to SMB2.0 compatible firmware (G0C02-9AV to GGD01-950), and 2 fixed. SEE DLKM_BT1929980EN

8/26/2019 194 KB DLKM BT1929980EN.pdf Release Notes: bizhub C3110 FW ver. main: A6DT30GJD01-951 - AirPrint setting becomes invalid after updating to SMB2.0 compatible firmware (G0C02-9AV to GGD01-950), and 2 fixed. SEE DLKM_BT1929980EN

8/26/2019 67.82 MB bizhubC3110 Cont_A6DT30GJD01-899.exe Release Notes: bizhub C3110 FW ver. main: A6DT30GJD01-951 - AirPrint setting becomes invalid after updating to SMB2.0 compatible firmware (G0C02-9AV to GGD01-950), and 2 fixed. SEE DLKM_BT1929980EN

Version Release_9

10/24/2018 67.91 MB bizhubC3110 Cont_A6DT30G0D00-999.exe Release Notes: bizhub C3110 Controller Firmware Version Release 9 SEE DLBT1809934EN00.pdf

10/24/2018 67.83 MB bizhubC3110 Cont_A6DT30G0D00-899.exe Release Notes: bizhub C3110 Controller Firmware Version Release 9 SEE DLBT1809934EN00.pdf

10/24/2018 71 KB DLBT1809934EN00.pdf Release Notes: bizhub C3110 Controller Firmware Version Release 9 README file

[Ziggy]

I do remember if done in wrong order you can brick the machine

[Hansoon]

Thanks Zig, you have a PM 😊

Hans