Ziggy
Markks
Senior Tech
Last Activity: 3 hours ago
Joined: 02-21-2018
Location: *
-
Can you get in service mode to see what error its giving? Also did you run the reset .tar file when you used boards from a donor machine? and which boards... -
swap yellow and magenta drum and see if symptoms change...Leave a comment:
-
Since upgrading to V24 the machine is working. I went ahead and updated one of the machines to the latest firmware GC2-RF but the other machine is still...Leave a comment:
-
Thank you...Leave a comment:
-
Are you finding the all solutions on the KM site? If so please tell me the path you are following. I cant find them since they changed the website a while...Leave a comment:
-
You cant take strgb or cpu from one machine and put it on another. once they are put in they are married to that machine with the backup that they do...Leave a comment:
-
Here ya go
...Leave a comment:
-
C6106 error code.
C6106 occurs during scanning from ADF.
"CAUSE: 1. Loose or dirty connection between the ADF and MFPB...Leave a comment:
-
What is the actual jam code? Machine should have a J then numbers after itLeave a comment:
-
I talked to KM support today and he said that machines are being released with G00-RF. They went ahead and released this because of the fixes it has....Leave a comment:
-
Just thought about this. They can login to the email that they use to scan and check their sent folder. At least in gmail you will get a failed to send...Leave a comment:
-
I like this suggestion the best
2) Have the sender CC themselves on the transmission
a) If the sender receives the email then success to other...Leave a comment:
-
KB0027367 Transmit confirmation reports for Scan to Email
Article metadata.
5mo ago5 months ago
This article has 38 views.•...Leave a comment:
-
Just checked it has been postedLeave a comment:
-
-
Thank you for posting this. As of right now G00-RF isn't available in the U.S. But KM has also told me that G00-RF should fix this issue . tsbservice...Leave a comment:
-
Here are the steps Paper settings>Choose Tray>change set> paper size> detect size setting. set all to the inch size. Pictures attached...Leave a comment:
-
I think this is the only option unless you have access to Konica Minolta tech support...Leave a comment:
-
jotunn has helped a lot of techs on this thread
https://www.copytechnet.com/forum/te...sion/konica-mi...Leave a comment:
-
Look under F PERIODICAL MAINTENANCE 28.5.2 Replacing the trimmer board assy in the service nanual...Leave a comment:
No activity results to display
Leave a comment: