C2070/C3070 A50UR72V00 Toner Conveyance Assy

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • methogod
    Senior Tech

    Site Contributor
    500+ Posts
    • Dec 2008
    • 917

    #1

    C2070/C3070 A50UR72V00 Toner Conveyance Assy

    anyone have one of these in stock that will sell me one...

    USED is ok too, BLACK if used is ok too, but ill clean any color and make it work....

    being told 2-3 weeks SPECIAL ORDER....
  • wjurls
    Trusted Tech

    Site Contributor
    250+ Posts
    • Feb 2017
    • 494

    #2
    Re: C2070/C3070 A50UR72V00 Toner Conveyance Assy

    Originally posted by methogod
    anyone have one of these in stock that will sell me one...

    USED is ok too, BLACK if used is ok too, but ill clean any color and make it work....

    being told 2-3 weeks SPECIAL ORDER....
    What happened to it that prompts it to be replaced and not repaired? Unfortunately I just recently sent a parts C1060 off to scrap.

    I may have another customer ready to retire one as well but that might be a spell yet.

    Comment

    • methogod
      Senior Tech

      Site Contributor
      500+ Posts
      • Dec 2008
      • 917

      #3
      Re: C2070/C3070 A50UR72V00 Toner Conveyance Assy

      Low density on Black C 2454

      DV units and DV were at 1.7M
      replaced all 4 after a long run of light coverage.
      confirmed its not adding toner to K (BLACK)

      Flags toner is present in sub hopper, i see it adding toner to CYM, density over 8% in the revert screen, whereas BLACK is at 1.1% and no toner is being added.

      I am having a hard time confirming the part number from the book to even order it.
      anyone want to help?

      Comment

      • blackcat4866
        Master Of The Obvious

        Site Contributor
        10,000+ Posts
        • Jul 2007
        • 22997

        #4
        Re: C2070/C3070 A50UR72V00 Toner Conveyance Assy

        This is what I'm showing in the C3070 manual:
        A9VER71700 Toner Conveyance Assy
        A9VER72000 Toner Supply Unit

        The C1060 manual lists:
        A50UR72V00 Toner Conveyance Assy

        I haven't had them apart, so I can't tell you about differences, but KM is pretty consistent about keeping the part number the same if the part is the same. That's a round-about way of saying that there are probably some differences.

        The C3070 manual lists separate part numbers for the gears and motor, which do not show up in the C1060 manual.

        =^..^=
        Attached Files
        If you'd like a serious answer to your request:
        1) demonstrate that you've read the manual
        2) demonstrate that you made some attempt to fix it.
        3) if you're going to ask about jams include the jam code.
        4) if you're going to ask about an error code include the error code.
        5) You are the person onsite. Only you can make observations.

        blackcat: Master Of The Obvious =^..^=

        Comment

        • methogod
          Senior Tech

          Site Contributor
          500+ Posts
          • Dec 2008
          • 917

          #5
          Re: C2070/C3070 A50UR72V00 Toner Conveyance Assy

          Told today that part number has been superseeded by

          A50UR72V00 REPLACED BY A50UR72V12
          $467.71

          pulling it tonight, know more shortly.


          in the market for a C6100 if anyone has one coming off service. Under 4M, full boat (Prefer SD506 and IQ).

          Comment

          • wjurls
            Trusted Tech

            Site Contributor
            250+ Posts
            • Feb 2017
            • 494

            #6
            Re: C2070/C3070 A50UR72V00 Toner Conveyance Assy

            Originally posted by methogod
            Low density on Black C 2454

            DV units and DV were at 1.7M
            replaced all 4 after a long run of light coverage.
            confirmed its not adding toner to K (BLACK)

            Flags toner is present in sub hopper, i see it adding toner to CYM, density over 8% in the revert screen, whereas BLACK is at 1.1% and no toner is being added.

            I am having a hard time confirming the part number from the book to even order it.
            anyone want to help?

            Could it also be Clutch 13? p/n A00FM20000 "Clutch"

            Each color has it's own clutch to drive the bottle.

            Comment

            • wjurls
              Trusted Tech

              Site Contributor
              250+ Posts
              • Feb 2017
              • 494

              #7
              Re: C2070/C3070 A50UR72V00 Toner Conveyance Assy

              Originally posted by blackcat4866
              This is what I'm showing in the C3070 manual:
              A9VER71700 Toner Conveyance Assy
              A9VER72000 Toner Supply Unit

              The C1060 manual lists:
              A50UR72V00 Toner Conveyance Assy

              I haven't had them apart, so I can't tell you about differences, but KM is pretty consistent about keeping the part number the same if the part is the same. That's a round-about way of saying that there are probably some differences.

              The C3070 manual lists separate part numbers for the gears and motor, which do not show up in the C1060 manual.

              =^..^=
              To a point, yes, but they have a lot of parts that are pretty much identical, and are a direct fit, with different part numbers. For example the "Toner Guide Brush" for the Pro 1051/1200 is part number A0G6R73011 and is discontinued. The exact same part for the 1052/1250 has a mildly different texture to the brush but otherwise is a direct fit to the 1051 and is part number A4EUR70K00. It's also much cheaper. Same deal with developing units and cleaner units, LPH, etc.

              Comment

              • methogod
                Senior Tech

                Site Contributor
                500+ Posts
                • Dec 2008
                • 917

                #8
                Re: C2070/C3070 A50UR72V00 Toner Conveyance Assy

                Originally posted by wjurls
                Could it also be Clutch 13? p/n A00FM20000 "Clutch"

                Each color has it's own clutch to drive the bottle.
                I have control of each toner bottle, eliminates the clutch and m15 motor. Replacing black sub hopper, and the printer control board if still not fixed after.

                toner hoppers are deep, almost cheaper to grab parts machine.

                Comment

                Working...