C284e Print quality issue. Advise please.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • chrisonline209
    Technician
    • Sep 2023
    • 14

    #16
    Re: C284e Print quality issue. Advise please.

    Originally posted by Synthohol
    I don't understand. One is in English and one is not.
    These are 2 different documents.
    I'm just not seeing a true comparison since the 2 documents are different.

    I'll step back and let someone else help because I'm just not getting it.
    Thank you all for your help. You are all amazing. The problem was solved because of your advise. Initialized and Stabilized fixed the issue. Thank you, thank you, thank you!

    Comment

    • Synthohol
      Certified Konica Expert

      Site Contributor
      5,000+ Posts
      • Mar 2016
      • 5745

      #17
      Re: C284e Print quality issue. Advise please.

      Hope you ran all the gradation adjustments after!!
      We know a thing or two because we've seen a thing or two.
      The medication helps though...

      Comment

      • chrisonline209
        Technician
        • Sep 2023
        • 14

        #18
        Re: C284e Print quality issue. Advise please.

        Originally posted by Synthohol
        Hope you ran all the gradation adjustments after!!
        Will do the gradation

        Comment

        • allan
          RTFM!!

          5,000+ Posts
          • Apr 2010
          • 5459

          #19
          Re: C284e Print quality issue. Advise please.

          Originally posted by Synthohol
          Hope you ran all the gradation adjustments after!!
          No real need to. Waste of time. Found that if you only do that in 90% of the cases its the best you will get.
          Initialize and stabilize will take it to factory and that is in most cases correct or good enough.
          Whatever

          Comment

          • chrisonline209
            Technician
            • Sep 2023
            • 14

            #20
            Re: C284e Print quality issue. Advise please.

            Originally posted by allan
            No real need to. Waste of time. Found that if you only do that in 90% of the cases its the best you will get.
            Initialize and stabilize will take it to factory and that is in most cases correct or good enough.
            This is such a great forum. I recently met a technician in my area and I'm definitely going to share this forum with him. Thank you guys so much

            Comment

            • copier tech
              Field Supervisor

              5,000+ Posts
              • Jan 2014
              • 8107

              #21
              Re: C284e Print quality issue. Advise please.

              Originally posted by chrisonline209
              Here is my test page.
              I can't see any issue with this print out.

              How about if you print a document from a USB pen, how does that look ?


              Let us eat, drink, and be merry, because tomorrow we may die!

              For all your firmware & service manual needs please visit us at:

              www.copierfirmware.co.uk - www.printerfirmware.co.uk

              Comment

              Working...