BizHub C224e

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • rrrohan
    Service Manager

    Site Contributor
    1,000+ Posts
    • Sep 2011
    • 1977
    #16
    Re: BizHub C224e

    Originally posted by copyman
    Thanks for the reply, Also does it on 2nd side when duplexing.
    so theoretically we have rules out the DS Board and the CCD

    im guess the MFPB. i was always told never to switch MFBP from its original copier so i have never tried it so dont have any XP with MFPB swap issues

      Comment

      • copyman
        Owner / Technician

        Site Contributor
        2,500+ Posts
        • Sep 2005
        • 4530
        #17
        Re: BizHub C224e

        Originally posted by rrrohan
        so theoretically we have rules out the DS Board and the CCD

        im guess the MFPB. i was always told never to switch MFBP from its original copier so i have never tried it so dont have any XP with MFPB swap issues
        I've swapped the MFPB from one machine to another many times without issues. Important to "cleanse" the board with firmware. Same thing Hytec dealer services does if you buy a repaired MFPB from them.

          Comment

          • Albonline
            Service Manager

            1,000+ Posts
            • Sep 2008
            • 1132
            #18
            Re: BizHub C224e

            Originally posted by 4Toon
            yes check to see if the duplex side is doing the same thing. Also check LED exposure to make sure its lighting up, seems to me its not getting light to the page to aluminate your copy and so its getting you a nice purple. LED exposure is a ribbon cable LU201. You can do a non image area test in service mode would show you if that is turning on properly. try doing a memory check too and see if there is any issues there
            not all adfs for this model have cis's.

              Comment

              • Albonline
                Service Manager

                1,000+ Posts
                • Sep 2008
                • 1132
                #19
                Re: BizHub C224e

                Originally posted by rrrohan
                so theoretically we have rules out the DS Board and the CCD

                im guess the MFPB. i was always told never to switch MFBP from its original copier so i have never tried it so dont have any XP with MFPB swap issues

                cleanse used board first. use original ssd , a failure code a first boot will display a code and should ask if you want to restore system, answer yes.

                  Comment

                  • copyman
                    Owner / Technician

                    Site Contributor
                    2,500+ Posts
                    • Sep 2005
                    • 4530
                    #20
                    Re: BizHub C224e

                    Originally posted by Albonline
                    not all adfs for this model have cis's.
                    This C224e does have the dual scan DF-701

                      Comment

                      • tsbservice
                        Field tech

                        Site Contributor
                        5,000+ Posts
                        • May 2007
                        • 7911
                        #21
                        Re: BizHub C224e

                        Originally posted by copyman
                        This C224e does have the dual scan DF-701
                        Do you have DF selected in service mode as dual scan?
                        A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
                        Blessed are they who can laugh at themselves, for they shall never cease to be amused.

                          Comment

                          • Albonline
                            Service Manager

                            1,000+ Posts
                            • Sep 2008
                            • 1132
                            #22
                            Re: BizHub C224e

                            Originally posted by tsbservice
                            Do you have DF selected in service mode as dual scan?
                            he must, failure code would happen otherwise.

                              Comment

                              • tsbservice
                                Field tech

                                Site Contributor
                                5,000+ Posts
                                • May 2007
                                • 7911
                                #23
                                Re: BizHub C224e

                                Originally posted by Albonline
                                he must, failure code would happen otherwise.
                                Really appreciate your posts. Thanks for coming to help.
                                A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
                                Blessed are they who can laugh at themselves, for they shall never cease to be amused.

                                  Comment

                                  Previous 1 2 template Next
                                  Working...