-
-
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^= -
tulintron, ele pode te ajudarA tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.Comment
-
Re: Paper Feed Problem - Konica pro 951
Hello, the machine starts the printing process, feeds 2 or 3 sheets and displays the code. 1102 or 1103
Another symptom is not showing the code. just the spinning noise as if it were printing, in this case it then displays the code c-4705 and needs to be reset
Comment
-
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: Paper Feed Problem - Konica pro 951
isnt there a white one way bushing on the rear of the feed shaft to prevent backlash?We know a thing or two because we've seen a thing or two.
The medication helps though...Comment
-
Re: Paper Feed Problem - Konica pro 951
[QUOTE=Synthohol; 2557112]Comment
-
Re: Paper Feed Problem - Konica pro 951
Like Synthohol mentioned, check the one way bushing on the feed assembly. If you haven't replaced the clutches yet do so now. C-4705 can sometimes just be due to excessive toner building up on top of the image process board. Check and clean as necessary. Do not vacuum the board directly. Use a can of compressed air holding the vacuum nozzle about 6 inches away to hopefully catch a lot of the cloud. If you end up needing an image process board let me know. I have several.Comment
Comment