IC-414 Fiery disassembly Konica C754E

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ferro10
    Trusted Tech

    100+ Posts
    • Jun 2015
    • 109
    #1

    IC-414 Fiery disassembly Konica C754E

    Hi everyone
    I have a customer with a Konica C754 with this warning message "Turn on controller"
    Considering that the customer is no longer needed Fiery is there any particular procedure for removal?

    Thank you
    Tags: customer, fiery, konica
    • copyman
      Owner / Technician

      Site Contributor
      2,500+ Posts
      • Sep 2005
      • 4530
      #2
      Re: IC-414 Fiery disassembly Konica C754E

      Originally posted by ferro10
      Hi everyone
      I have a customer with a Konica C754 with this warning message "Turn on controller"
      Considering that the customer is no longer needed Fiery is there any particular procedure for removal?

      Thank you
      Remove Fiery & interface board on rear of machine. Then go into service mode (System 2, Image controller) and set controller to "0". That is all you have to do.

        Comment

        • ferro10
          Trusted Tech

          100+ Posts
          • Jun 2015
          • 109
          #3
          Re: IC-414 Fiery disassembly Konica C754E

          Originally posted by copyman
          Remove Fiery & interface board on rear of machine. Then go into service mode (System 2, Image controller) and set controller to "0". That is all you have to do.
          Thanks for the reply

            Comment

            • Synthohol
              Certified Konica Expert

              Site Contributor
              5,000+ Posts
              • Mar 2016
              • 5737
              #4
              Re: IC-414 Fiery disassembly Konica C754E

              technically you don't have to physically remove it, just changing the controller type to 0 will ignore the fiery and interface board and use only the emperon embedded one. just power it off and remove the network cables
              We know a thing or two because we've seen a thing or two.
              The medication helps though...

                Comment

                • copyman
                  Owner / Technician

                  Site Contributor
                  2,500+ Posts
                  • Sep 2005
                  • 4530
                  #5
                  Re: IC-414 Fiery disassembly Konica C754E

                  Synthohol is correct if you don't want to remove. But since you asked specifically "is there any particular procedure for removal" I posted on how to remove. Not a big deal to remove. Will take maybe 10 mins at most.
                  Attached is the IC414 install instructions, just reverse procedure.
                  Attached Files

                    Comment

                    Previous template Next
                    Working...