Bizhub C224e: Problem with printing cyan

[copyman]

Re: Bizhub C224e: Problem with printing cyan

Cyan developer dumping is a common issue most of the time because of over life drums shorting out. You will need to replace any overlife consumables, especially the cyan drum & add developer. Since dev units are so expensive I use aftermarket developer powder to fill dev unit that has dumped. Get level in state confirmation to 6+%
If you don't replace the over life consumables developer will dump again and you will go through this all over again!

[Albonline]

Re: Bizhub C224e: Problem with printing cyan

Greetings kind strangers,

we recently got hold of a used Bizhub C224e that has a problem printing cyan (the other colors are printed correctly).

This is what the gradation test looks like (printed on A3).
[ATTACH=CONFIG]61173[/ATTACH]

Consumable life is given as follows:
Developing Unit 98%
Drum 69%
Transfer Roller 92%
Image transfer belt 69%

Can you point me into the right direction as to which unit may cause this problem?
Kind regards

the developer unit is empty, you will need to determine why and refill, or better yet replace the cyan units. the charge system in the drum unit is probably fouled from toner mist.

[techsxge]

Re: Bizhub C224e: Problem with printing cyan

In this case switching drums has nothing to do with depleted developer.
Time to call good KM tech.

but the pattern looks more like drum to me?
or am i really that sick that i cant even recognize the error pattern anymore?

[tsbservice]

Re: Bizhub C224e: Problem with printing cyan

Could be a Drum issue. Switch the cyan drum with the yellow ormagenta one and see if that changes anything

In this case switching drums has nothing to do with depleted developer.
Time to call good KM tech.

[techsxge]

Re: Bizhub C224e: Problem with printing cyan

Could be a Drum issue. Switch the cyan drum with the yellow ormagenta one and see if that changes anything

[Leonard590]

Greetings kind strangers,

we recently got hold of a used Bizhub C224e that has a problem printing cyan (the other colors are printed correctly).

This is what the gradation test looks like (printed on A3).
Bild_2024-01-16_093320489.jpg

Consumable life is given as follows:
Developing Unit 98%
Drum 69%
Transfer Roller 92%
Image transfer belt 69%

Can you point me into the right direction as to which unit may cause this problem?
Kind regards