Firmware Help

[mkdirs]

Hello every one
This is the first time trying to upgrade the software
i have 2 machines
first Konica 758 B&W With firmware A7950Y0-3000-G00-P3
second Develop develop ineo 758 B&W With firmware A7950Y0-3000-G00-R2

I discovered that the two devices are the same

I have A7950Y0-F000-G00-Q1 FIRMWARE

I'm trying to use it by extracting the file
And copy all the contents of the file FW004 to usb root with FAT23 format

When the machine boots up it goes straight to the home screen and I can't get into update mode

What mistake am I making?

thanks

[Synthohol]

Re: Firmware Help

the whole FWxxxx folder goes on the root of the flashdrive as is.
dont extract nothing past the original .exe self extractor to see the FWxxxx folder.

[mkdirs]

Re: Firmware Help

the whole FWxxxx folder goes on the root of the flashdrive as is.
dont extract nothing past the original .exe self extractor to see the FWxxxx folder.

Thanks for your quick response
1- I downloaded the A7950Y0-F000-G00-Q1.exe
2- I Extract the .exe file
3- i get 2 folders and .bat file
cw Folder
FW0004 Folder
mktar_A795.bat file

4- I copy FW0004 Folder to the root of the rm disk ( the copier dose not go to update screen )
5- I copy all files from FW0004 Folder to the root of the rm disk ( the copier dose not go to update screen )

i do Exactly like #Konica #Konicacopiers How to install firmware on Konica Bizhub C754/C654 - YouTube

[mkdirs]

Re: Firmware Help

Ok Thank you all its done
I copy all files from FW0004 Folder to the root of the rm disk
I Power On the machine with yellow button pressed then i get the update screen


i have the A7950Y0-F000-G00-Q1 firmware since 2017
any one can help with newer version

thanks.

[Synthohol]

Re: Firmware Help

i have y1 and y2.
see PM

[copier tech]

Re: Firmware Help

Thanks for your quick response
1- I downloaded the A7950Y0-F000-G00-Q1.exe
2- I Extract the .exe file
3- i get 2 folders and .bat file
cw Folder
FW0004 Folder
mktar_A795.bat file

4- I copy FW0004 Folder to the root of the rm disk ( the copier dose not go to update screen )
5- I copy all files from FW0004 Folder to the root of the rm disk ( the copier dose not go to update screen )

i do Exactly like #Konica #Konicacopiers How to install firmware on Konica Bizhub C754/C654 - YouTube

The C754 & your 758 use a different update process.

Copy your FW0004 folder to your USB & plug into the USB port near the control panel. Power on the device while holding down the stop (red) key.

Bizhub 758 958 GCQ-Y2 Firmware Readme.pdf

[mkdirs]

Re: Firmware Help

The C754 & your 758 use a different update process.

Copy your FW0004 folder to your USB & plug into the USB port near the control panel. Power on the device while holding down the stop (red) key.

[ATTACH]61928[/ATTACH]

thanks friend
done holding down the reset (yellow) key.