Minolta CF3102 Voids on all edges

copyman

Owner / Technician

Site Contributor
2,500+ Posts

Join Date: Sep 2005

Posts: 4651
#1

Minolta CF3102 Voids on all edges

01-08-2010, 02:18 PM

there is a void area around the whole copy on every edge. When using ADF or placing original on glass. I tried some of the adjustments but it did not help. Maybe I didn't do the right ones?
I'm used to the B & W's like the Di-251 where you could put all the edge erases to 0 and lead edge to 2mm. The one edge is almost 1/4 inch. Only 10k on the meter.
Thank You
Tags: cf3102, di-251, dirty, edges, lead edge, minolta, voids
Stirton.M

All things Konica Minolta

1,000+ Posts

Join Date: Oct 2009

Posts: 1804
#2

01-08-2010, 11:54 PM

As I recall, this cannot be done.

Nor is it advisable. This can lead to other problems, such as dirty copies on the back side.

Do what a print shop normally does and go to oversized paper stock and trim it for full bleed.

Or shrink to fit via zoom....0.995%

"Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
---Groucho Marx

Please do not PM me for questions related to Konica Minolta hardware.
I will not answer requests or questions there.
Please ask in the KM forum for the benefit of others to see the question and give their input.
Comment

Comment