15 results in 0.0152 seconds.
-
Sharp MX3571 voids on black print only
Hey y'all I've replaced the K drum, the ITB, fuser and have tried a different developer unit and i'm still getting voids across the pages at the top and... -
MX-4070N intermittent voids and fills
We have a Sharp MX-4070N that has intermittent fills and voids. They can run 200 or more pages without any problems. We have replaced all the consumables... -
Toshiba 3540C Copy Quality voids 2 colors only
Looking for help with this E-Studio 3540C. Attached image of test prints showing voiding with two colors only. Yellow and cyan are fine. Black and magenta... -
KIP 890
Hello to all,
Last year I rebuilt all 3 color developers in this KIP 890 (banding issues). Everything was fine until a few weeks ago. Now... -
FS-8520 Voids on print
Kyocera FS-8520. I am getting these voids while printing. The DV and drum look fine. This one has me scratching my head. Thanks for any... -
8520 voids on print
Kyocera FS-8520. I am getting these voids while printing. The DV and drum look fine. This one has me scratching my head. Thanks for any help. I attached... -
Mp c4503 voids in black /cyan/magenta
copier has less then 60,000 copies on black and color.
i received this copier has voids in black and cyan and magenta copies . Yellow is... -
Phaser 6110, voids in black...
Phaser 6110. Remote located customer, I have not yet seen the machine myself yet. There are voids in the black. See attached scans. Any hints before I... -
Kip 3002
I recently posted about a void area on my image, this was a linear void, that was obvious that something was interfering dust, etc. partially solved it,...Last edited by Guest; 04-01-2012, 09:33 PM. -
IR8500 White Dots/Voids
I have a copy quality problem with an IR8500 where white dots or voids are showing up against a halftone and to a lesser extent on solid black. It is... -
Minolta CF3102 Voids on all edges
there is a void area around the whole copy on every edge. When using ADF or placing original on glass. I tried some of the adjustments but it did not... -
Full Bleed on a C900
Has anybody had any luck getting a C900 to print full bleed? I'll settle for a 3 edge full bleed.
Ricoh keeps saying it won't do it: Print... -
Xerox 5820 every other copy w/vert. void
This is an old machine but low meter count.
It will leave a top to bottom void every other copy. Not a complete void but very light, really about... -
Intermittent voids on C350
I have a C350 that will intermittently give me a void. It usually only does it on 11 x 17. The problem first appeared two months ago. After replacing... -
C500 voids on all colors after PM.
When I run the test mode and print halftones all colors have void spots throughtout the page. Changing out the developer unit fixes the issue but on next...
