Konica Minolta Bizhub C353 Print Stop

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • pdcopiers
    Technician
    • Jun 2014
    • 15

    #16
    Re: Konica Minolta Bizhub C353 Print Stop

    Originally posted by nvram
    Hi, Did the machine return an IP address starting 169.254 if so the nic has gone to sleep, it is possible to awaken it by changing the network speed in detail settings of the network setting tab.
    Thank You, I have to go back to this client today and I'll try to change the network speed. I think this is the problem because when I tried to set by DHCP it was change to 169.254.... I let you what happen today or tomorrow.

    Comment

    • copier tech
      Field Supervisor

      5,000+ Posts
      • Jan 2014
      • 8131

      #17
      Re: Konica Minolta Bizhub C353 Print Stop

      Yes i've had the same issue, change the netword card speed fron Auto to full duplex
      Let us eat, drink, and be merry, because tomorrow we may die!

      For all your firmware & service manual needs please visit us at:

      www.copierfirmware.co.uk - www.printerfirmware.co.uk

      Comment

      • Hansoon
        Field Supervisor

        Site Contributor
        2,500+ Posts
        • Sep 2007
        • 3373

        #18
        Re: Konica Minolta Bizhub C353 Print Stop

        Many moons ago I ripped out the RJ45 connector by just moving a BH-C-253 and forgetting to remove the network cable first.............

        Hans
        “Sent from my Intel 80286 using MS-DOS 2.0”

        Comment

        • allan
          RTFM!!

          5,000+ Posts
          • Apr 2010
          • 5462

          #19
          Re: Konica Minolta Bizhub C353 Print Stop

          If you are running on SLA's chiping is a must to beat the competition on print costs. We chip(reset) those tanks in a office environment up to twice with not problems.
          Whatever

          Comment

          • pdcopiers
            Technician
            • Jun 2014
            • 15

            #20
            Re: Konica Minolta Bizhub C353 Print Stop

            Originally posted by Hansoon
            Many moons ago I ripped out the RJ45 connector by just moving a BH-C-253 and forgetting to remove the network cable first.............

            Hans
            Well, my client moved the machine few step, but he didn't mentioned that his forgot to remove the network cable first... How did you fixed that?

            Comment

            • Hansoon
              Field Supervisor

              Site Contributor
              2,500+ Posts
              • Sep 2007
              • 3373

              #21
              Re: Konica Minolta Bizhub C353 Print Stop

              Post from
              01-28-2014

              Re: Time to admit to all your boo boos

              Originally Posted by Hansoon
              My Booboo of today:

              BH-C-253 ready to be transported to the customer. Forgot to remove the TCP/IP cable when I moved the machine........

              Two of the contact wires came out of the socket and are twisted beyond repair. The plastic and the shielding of the socket are damaged too.

              Hans



              OK, removed the socket from the board (*note to oneself, with the next booboo buy a decent de- soldering equipment*) and reconstructed everything. Machine is up and working now until my next goof-up........

              Hans
              “Sent from my Intel 80286 using MS-DOS 2.0”

              Comment

              • pdcopiers
                Technician
                • Jun 2014
                • 15

                #22
                Re: Konica Minolta Bizhub C353 Print Stop

                Originally posted by Hansoon
                Post from
                01-28-2014

                Re: Time to admit to all your boo boos
                Originally Posted by Hansoon
                My Booboo of today:

                BH-C-253 ready to be transported to the customer. Forgot to remove the TCP/IP cable when I moved the machine........

                Two of the contact wires came out of the socket and are twisted beyond repair. The plastic and the shielding of the socket are damaged too.

                Hans



                OK, removed the socket from the board (*note to oneself, with the next booboo buy a decent de- soldering equipment*) and reconstructed everything. Machine is up and working now until my next goof-up........

                Hans
                Yeah I remember that I'd the same problem long time ago, but already check the wires in the socket and there are look fine...

                Comment

                • pdcopiers
                  Technician
                  • Jun 2014
                  • 15

                  #23
                  Re: Konica Minolta Bizhub C353 Print Stop

                  Hi guys, copier tech is right. The Machine is working again, Network card is working. This is solution for this problem:

                  Change the netword card speed from Auto to full duplex

                  But Before that, measure the socket has not damage...

                  Thank You guys for all your help.

                  Comment

                  • copier tech
                    Field Supervisor

                    5,000+ Posts
                    • Jan 2014
                    • 8131

                    #24
                    Re: Konica Minolta Bizhub C353 Print Stop

                    Boom! Rep power please!
                    Let us eat, drink, and be merry, because tomorrow we may die!

                    For all your firmware & service manual needs please visit us at:

                    www.copierfirmware.co.uk - www.printerfirmware.co.uk

                    Comment

                    Working...