bizhub c224

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • bineeshgeorge
    Trusted Tech

    100+ Posts
    • Jul 2009
    • 107
    #1

    bizhub c224

    Hai dear friends,


    One of my bizhub c224 gives fade copy after one month rest. Before one month rest it was no problem.
    It gives very fade copies and no yellow,other colours are present ,but very light.Gradation is not possible because it shows p6,p7,p8,p9,p21and p28. This machine run only 40000 copies. I had check all drum units ,developer units and transfer belt but no one see abnormal.please help me with your valuable suggestions ...
    Tags: None
    • RRodgers
      Service Manager

      1,000+ Posts
      • Jun 2009
      • 1947
      #2
      Re: bizhub c224

      Originally posted by bineeshgeorge
      Hai dear friends,


      One of my bizhub c224 gives fade copy after one month rest. Before one month rest it was no problem.
      It gives very fade copies and no yellow,other colours are present ,but very light.Gradation is not possible because it shows p6,p7,p8,p9,p21and p28. This machine run only 40000 copies. I had check all drum units ,developer units and transfer belt but no one see abnormal.please help me with your valuable suggestions ...
      Most copier while they have a max number of copies they'll do a month also have "at least run this many" a month figure as well. I remember the C500, it was recommended that you ran at least 5000 copies on it a month or you'd have problems.
      Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22963
          #3
          Re: bizhub c224

          Agreed. We have customers that buy color copiers for 25K black and 500 color per month. The next time they want to do a big color job, the color developer is dead, and they complain: " ... but we haven't even used color!"

          Exactly. =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            • occus
              Trusted Tech

              250+ Posts
              • Jul 2013
              • 327
              #4
              Re: bizhub c224

              Check the toner value in DV. It should be around 7%...

                Comment

                • support@itecgroup.com
                  Technician
                  • Apr 2013
                  • 16
                  #5
                  Re: bizhub c224

                  Hi,

                  Sounds to me like a HV problem. Test with another HV board. Should sort out this problem. Common problem on this models

                    Comment

                    • copier tech
                      Field Supervisor

                      5,000+ Posts
                      • Jan 2014
                      • 8111
                      #6
                      Re: bizhub c224

                      Have you cleaned the IDC sensors?
                      Copier dont like not being used, Try cleaning them then running 50 or so colour duplex prints
                      Let us eat, drink, and be merry, because tomorrow we may die!

                      For all your firmware & service manual needs please visit us at:

                      www.copierfirmware.co.uk - www.printerfirmware.co.uk
                      ​

                        Comment

                        • bineeshgeorge
                          Trusted Tech

                          100+ Posts
                          • Jul 2009
                          • 107
                          #7
                          Re: bizhub c224

                          Originally posted by copier tech
                          Have you cleaned the IDC sensors?
                          Copier dont like not being used, Try cleaning them then running 50 or so colour duplex prints
                          IDC Sensor cleaned.

                            Comment

                            Previous template Next
                            Working...