Bizhub C451 - many warning codes - copier not operational

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • thendral
    Technician

    Site Contributor
    50+ Posts
    • Mar 2011
    • 82
    #1

    [Error Code] Bizhub C451 - many warning codes - copier not operational

    Hello All,

    One of my customer has Konica Minolta bizhub C451 - displaying bunch of warning messages:





    The following notification message is being displayed.

    <<Page 1>>

    Cannot Scan
    Tray 1 cannot be used currently.
    Tray 2 cannot be used currently.
    Tray 3 cannot be used currently.
    Tray 4 cannot be used currently.
    LCT cannot be used currently.
    Bypass Tray cannot be used currently.

    <<Page 2>>
    Hole Punch cannot be used currently.
    Staple cannot be used currently.
    Unable to Half-Fold/Center Staple-Fold/Tri-Fold
    Z-Fold cannot be used currently.
    Post Inserter cannot be used at this time.

    I checked all the connections to ADF, all the electrical connections to sorter and other trays.
    Being Ricoh tech, I not sure if any settings I am missing.

    Any help in this regard is highly appreciated.

    Thanks
    Thendral
    Tags: adf, c451, finisher, hole punch, tray
    • thendral
      Technician

      Site Contributor
      50+ Posts
      • Mar 2011
      • 82
      #2
      Re: Bizhub C451 - many warning codes - copier not operational

      Oh Sorry forgot mention, it is not recognizing the Fiery controller either. It is not showing up in the utilities screen.

        Comment

        • allan
          RTFM!!

          5,000+ Posts
          • Apr 2010
          • 5445
          #3
          Re: Bizhub C451 - many warning codes - copier not operational

          go check trouble isolation maybe you can unlatch them. if not i think the OACB it wacky. Or a missing voltage from the supply.
          Whatever

            Comment

            • KingofMorton
              Technician
              • Apr 2015
              • 23
              #4
              Re: Bizhub C451 - many warning codes - copier not operational

              Go to System 1, problem isolation, make sure they are all on set. Power cycle the machine and see what happens. You may have to "unset" them, power cycle, the "set" them again and power cycle.

                Comment

                • thendral
                  Technician

                  Site Contributor
                  50+ Posts
                  • Mar 2011
                  • 82
                  #5
                  Re: Bizhub C451 - many warning codes - copier not operational

                  Originally posted by KingofMorton
                  Go to System 1, problem isolation, make sure they are all on set. Power cycle the machine and see what happens. You may have to "unset" them, power cycle, the "set" them again and power cycle.
                  Thanks a lot KingofMorton. I did set and unset then the message disappeared.

                  Thanks a lot.

                  Not really sure what happened. But any way got it up and running.

                  Regards
                  Thendral

                    Comment

                    Previous template Next
                    Working...