17 results in 0.0160 seconds.
-
Bizhub C658 with FS-536 Inconsistent Finishing
We just delivered a C658 with FS-536 finisher (Staple and Hole Punch) to a client last week, and they are having a couple issues with finishing options.... -
FS-534 j7216
Hello, within 4 days of each other I have gone to 2 separate accounts with j7216 jams. On both occasions I have found that the hole punch pin on the... -
131st Anniversary of the Hole Puncher
Today Google Doodle commemorates the 131st anniversary of the beloved hole puncher, I would have thought the hole puncher was more that 131 years old... -
Bizhub C451 - many warning codes - copier not operational
Hello All,
One of my customer has Konica Minolta bizhub C451 - displaying bunch of warning messages:
... -
Canon 5051 Hole punch problems
I have a canon 5051 that offsets the first page when you hole punch. The rest come out ok, any ideas? Thanks -
Imagerunner advanced 9070 holepunch
Hi chaps,installed an ira 9070 with hole punch bg1Last night and the m/c is asking for the hole waste To be emptied .any ideas ? -
c220 message will not clear
machine sees finisher, but there is no finisher attached. messages are: hole punch, Z Fold, Z fold not possible. message also comes up to say it only... -
3 hole punch on angle, see pic
sorry didn't mention in my original post it's for DC 240 finisher/3hole punch and booklet maker
Tried lube punches and the rail, to no avail. Take...Last edited by Dexor; 06-03-2011, 04:47 AM. -
c5185 hole punch (AH1) install instructions
Does anyone have the install instructions for the hole punch unit for a C5185?
Thanks -
PK-517 Problem
PK-517 fitted in an FS-527, on 2 models, 452 + 652. All set up as per instructions, in this case 2/4 holes. Problem is, when you ask for 2 hole punch... -
B751
the new B751 firmware is ver.19 however it creates a problem when a finisher FS525 is installed .every 3 print or copy job jams (hole punch /stapling)... -
DF71 finisher sensor
I have a KM3530 that has the DF71 finisher, I am needing the sensor located behind the hole punch catch tray. I only have 1 of these in the field so... -
BH601 Jaming in PK505
I keep getting jams in the PK505 j72-12,13 i replaced the PK twice already and the control board as well It jams right at the die its seams with die #3... -
5035 / DF71 3-hole punch alignment ???
How does one adjust the alignment top to bottom on the hole punch with DF-71 finisher, this machine I have in the shop is off about a full 1/2" top...
