Konica Minolta 215

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Cloudlessdreams
    Technician
    • May 2015
    • 17

    #31
    Re: Konica Minolta 215

    Originally posted by blackcat4866
    .113, .114, or .115 will be fine for an IP.
    Subnet and Gateway remain the same. You can enter a DNS if you like, but it's unnecessary.

    You're getting there. I made (and continue to make) all the same mistakes, so don't feel too bad. You're still trying things, which is important. And you have a sense of humor about it all. It's unhelpful to beat yourself up over things you don't know.

    Personally I feel that the my greatest asset as a diagnostitian is blockheaded stubbornness. Unwillingness to give up. =^..^=
    Thanks dude really appreciate it. Was really ready to give up; I'll give this a shot later today and get back to you. Thanks man a lot of peeps would of had enough of my idiocy, you the man/woman/cat! (Delete as appropriate).

    Comment

    • Cloudlessdreams
      Technician
      • May 2015
      • 17

      #32
      Re: Konica Minolta 215

      Wired connection> connected> ping results fine. Packets received and sent fine. Excellent ping results konica minolta 215.jpg

      Turn of wifi adapter; install driver ic-209? PCL6 the only driver that doesn't return syntax errors! Great installed (shows as connected printer properties etc brilliant. Print test page please: No!

      Delete printer/uninstall. Go to printers>add printer>finds and attempts to install printer(auto)> driver error..

      Printers>add printer>finds printer (manually)>try to install drivers (manually).. driver error..



      It's not a hardware issue; is it because I'm in Oman (Gulf/Middle.East)?! I don't why that would make any difference though!

      What now folks? Kick it and walk away?

      Comment

      • suomi
        Trusted Tech

        100+ Posts
        • Oct 2008
        • 152

        #33
        Re: Konica Minolta 215

        You have tried to GDI Driver ver:2 & 1.
        Whic print controller????

        Comment

        • Cloudlessdreams
          Technician
          • May 2015
          • 17

          #34
          Re: Konica Minolta 215

          Originally posted by suomi
          You have tried to GDI Driver ver:2 & 1.
          Whic print controller????
          Yep tried the GDI driver and PCL. All drivers I've tried give syntax or OS errors expect the controller IC-209 which installs and shows as working but without functionality.

          Should I try the older drivers? I've only been trying the newer/latest releases as my assumption is these are most up to date and likely to work?!

          Comment

          • suomi
            Trusted Tech

            100+ Posts
            • Oct 2008
            • 152

            #35
            Re: Konica Minolta 215

            I guess it does not harm...
            Depends machine firmware version?

            Comment

            • Cloudlessdreams
              Technician
              • May 2015
              • 17

              #36
              Re: Konica Minolta 215

              Originally posted by suomi
              I guess it does not harm...
              Depends machine firmware version?
              Thank you! Thank you! Thank you! Thank you! Thank you! Thank you! Thank you!

              THANK YOU! EVERYONE!


              Seriously, Thank you everyone! You've taught me sooo much about printer networks, diagnostics, ip addresses , ethernet/crossovers..

              Wow! What a lesson! Feel like dancing and kissing you all!!

              You guys are fantastic!!! Thanks

              Comment

              • blackcat4866
                Master Of The Obvious

                Site Contributor
                10,000+ Posts
                • Jul 2007
                • 23002

                #37
                Re: Konica Minolta 215

                Congratulations on your success! Everyone else calls me Cat. That will work fine. =^..^=
                If you'd like a serious answer to your request:
                1) demonstrate that you've read the manual
                2) demonstrate that you made some attempt to fix it.
                3) if you're going to ask about jams include the jam code.
                4) if you're going to ask about an error code include the error code.
                5) You are the person onsite. Only you can make observations.

                blackcat: Master Of The Obvious =^..^=

                Comment

                Working...