FS-1128 scan lead edge cutoff.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jmaister
    certified scrub

    Site Contributor
    500+ Posts
    • Aug 2010
    • 755
    #1

    FS-1128 scan lead edge cutoff.

    u068 and u071 are on max negative, but the image has crept up even more since few weeks ago when the adjustment was done.

    Couldnt find QA, nor related documentation on this. Well there is one, but it says when "scanning position is off". Base on description of that QA the image is late, not early.

    Print is perfect however.

    any encounter on this?
    Idling colour developers are not healthy developers.
    Tags: None
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22997
      #2
      Re: FS-1128 scan lead edge cutoff.

      Does it affect DF and OC images equally? How about scans?

      Just throwing this out there: Way back we had a couple of techs that liked to oil the photointerrupters (including scanner home position and registration). Genius at work. Oil is good for everything, yes? The result was scanner registration varying all over the place and slamming. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • jmaister
          certified scrub

          Site Contributor
          500+ Posts
          • Aug 2010
          • 755
          #3
          Re: FS-1128 scan lead edge cutoff.

          Originally posted by blackcat4866
          Does it affect DF and OC images equally? How about scans?

          Just throwing this out there: Way back we had a couple of techs that liked to oil the photointerrupters (including scanner home position and registration). Genius at work. Oil is good for everything, yes? The result was scanner registration varying all over the place and slamming. =^..^=
          Off the glass is ok, but by DF is consistently ahead by around an 3/4 to 1 inch by eye. It doesnt only happen on the first page, happens on every page.
          AND
          this lil' annoying glitch stays with the machine, doesnt follow the DF when we swapped it with another.
          Idling colour developers are not healthy developers.

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22997
              #4
              Re: FS-1128 scan lead edge cutoff.

              If it stays with the machine, I would try the scanner board first, then the Main PWB. It sounds to me like you've already thought of that. =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                • jmaister
                  certified scrub

                  Site Contributor
                  500+ Posts
                  • Aug 2010
                  • 755
                  #5
                  Re: FS-1128 scan lead edge cutoff.

                  Originally posted by blackcat4866
                  If it stays with the machine, I would try the scanner board first, then the Main PWB. It sounds to me like you've already thought of that. =^..^=
                  next on the list fer monday.
                  Idling colour developers are not healthy developers.

                    Comment

                    • tmaged
                      Owner/Service Manager

                      Site Contributor
                      1,000+ Posts
                      • Oct 2008
                      • 1868
                      #6
                      Re: FS-1128 scan lead edge cutoff.

                      The grease on the shaft of the scanner gets sticky & dry. I'd clean it with alcohol & oil it before doing any boards.
                      Hope that helps !
                      -Tony
                      www.dtios.com
                      Become a fan on Facebook

                        Comment

                        • jmaister
                          certified scrub

                          Site Contributor
                          500+ Posts
                          • Aug 2010
                          • 755
                          #7
                          Re: FS-1128 scan lead edge cutoff.

                          ding ding, it was the main pwb.

                          thx gents.
                          Idling colour developers are not healthy developers.

                            Comment

                            • blackcat4866
                              Master Of The Obvious

                              Site Contributor
                              10,000+ Posts
                              • Jul 2007
                              • 22997
                              #8
                              Re: FS-1128 scan lead edge cutoff.

                              Congratulations on your success, and thanks for posting back. =^..^=
                              If you'd like a serious answer to your request:
                              1) demonstrate that you've read the manual
                              2) demonstrate that you made some attempt to fix it.
                              3) if you're going to ask about jams include the jam code.
                              4) if you're going to ask about an error code include the error code.
                              5) You are the person onsite. Only you can make observations.

                              blackcat: Master Of The Obvious =^..^=

                                Comment

                                Previous template Next
                                Working...