Kyocera FS C8520 MFP Jamming in Vertical Transport

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • docfeeder
    Technician
    • Aug 2015
    • 12
    #1

    Kyocera FS C8520 MFP Jamming in Vertical Transport

    Hi All

    I have an issues with jamming in the vertical transport section on a Kyocera FS C8520. I have cleaned the vertical sensor. The paper gets to the transfer belt/ transfer roller and then just folds and jams in that area every time. I have run up the machine with the door open and noticed the transfer belt either does not turn or stops/starts in a jerking movement. The drive motor turns, so I am guessing the problem is in the drive assembly or clutch?

    Has anyone else had this problem ? Is it a known issue ? And do you have to replace the complete drive assembly?

    Thanks

    Kevin
    Tags: None
    • KdvA
      Engineer
      • Aug 2008
      • 10
      #2
      Re: Kyocera FS C8520 MFP Jamming in Vertical Transport

      most likely a defective "middle transfer drive shaft".

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22999
          #3
          Re: Kyocera FS C8520 MFP Jamming in Vertical Transport

          jam code? =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            • tmaged
              Owner/Service Manager

              Site Contributor
              1,000+ Posts
              • Oct 2008
              • 1870
              #4
              Re: Kyocera FS C8520 MFP Jamming in Vertical Transport

              http://www.copytechnet.com/forums/ky...lding-jam.html

              The search function is your friend.
              Hope that helps !
              -Tony
              www.dtios.com
              Become a fan on Facebook

                Comment

                • serviceman678
                  Technician
                  • Sep 2016
                  • 19
                  #5
                  Re: Kyocera FS C8520 MFP Jamming in Vertical Transport

                  Originally posted by docfeeder
                  Hi All

                  I have an issues with jamming in the vertical transport section on a Kyocera FS C8520. I have cleaned the vertical sensor. The paper gets to the transfer belt/ transfer roller and then just folds and jams in that area every time. I have run up the machine with the door open and noticed the transfer belt either does not turn or stops/starts in a jerking movement. The drive motor turns, so I am guessing the problem is in the drive assembly or clutch?

                  Has anyone else had this problem ? Is it a known issue ? And do you have to replace the complete drive assembly?

                  Thanks

                  Kevin
                  check the toner recycling system if the auger get jam this will happen also if the fuser doesnt come to the proper temp this will also happen but you need a spare fuser for

                    Comment

                    Previous template Next
                    Working...