DF-7120 J6511

Collapse
X
Collapse
 
  • Page of 5
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 4 5 template Next
  • progoffice
    Trusted Tech

    250+ Posts
    • Nov 2008
    • 333
    #61
    Re: DF-7120 J6511

    Originally posted by kuby
    Have installed 5 kits so far, gets faster each time. So far so good and no complaints from the customers. That is a PLUS.
    What "kits" are you referring too, and are you having to do this on brand new finishers? We're still seeing lots of finisher jams - even on brand new machines. Kyocera says we're the only ones, maybe I should send them this thread.

      Comment

      • skinnypuppy
        CopierJanitor/Geargluer

        50+ Posts
        • May 2008
        • 85
        #62
        I have had a number of 4 series machines throwing finisher codes on DF 7120 I have found a couple of things that may be of use. 1 make sure the stack height mod per black cat (2mm higher on tray 3 and 4) has been done. 2 Adjust fuser temp 161 down by 10 degrees under the print section of 161 fuser adjustment The jams were mainly happening after a prolonged period of sleep by the MFP

          Comment

          Previous 1 2 3 4 5 template Next
          Working...