KM-3050 from a wholesaler

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Jimbo1
    Senior Tech

    500+ Posts
    • Mar 2008
    • 845
    #1

    KM-3050 from a wholesaler

    Ok we got this 3050 from a wholesaler with about 50k on it.


    We are trying to track down a shading problem from front to rear that is there whether print or copy..

    It's lighter in the rear than the front.

    We have installed new drum-dev-transfer-main charge.

    Anybody got any ideas. Ever seen the laser do this?
    "Some days you get the bear, some days the bear gets you."

    Cdr. William Riker
    Tags: dev, df-670, km3050, networking, silliness, wholesaler
    • aragul
      Trusted Tech

      100+ Posts
      • Dec 2007
      • 128
      #2
      I've seen a main charge cleaner cause this by pushing the front end of the main charge away from the drum. You can throw in a Falcon 1-2 main charge to rule out the cleaner.

      It was our first Falcon 3, and I was already frustrated with the horrible response time from the interface when we saw the excellent shaded prints. Disassembling the cleaner and messing with the gears fixed it.

        Comment

        • Jimbo1
          Senior Tech

          500+ Posts
          • Mar 2008
          • 845
          #3
          We have swapped in a whole new main charge unit and it still does it.
          "Some days you get the bear, some days the bear gets you."

          Cdr. William Riker

            Comment

            • Jimbo1
              Senior Tech

              500+ Posts
              • Mar 2008
              • 845
              #4
              Never mind. We discovered someone got the charge units mixed up.


              Thanks to all.

              "Some days you get the bear, some days the bear gets you."

              Cdr. William Riker

                Comment

                • blackcat4866
                  Master Of The Obvious

                  Site Contributor
                  10,000+ Posts
                  • Jul 2007
                  • 22973
                  #5
                  This happens on all the Stratos and Falcon machines. Only one customer in 100 actually reads the instructions, and tries to clean the primary. If the cleaner isn't positioned exactly right..... =^..^=
                  If you'd like a serious answer to your request:
                  1) demonstrate that you've read the manual
                  2) demonstrate that you made some attempt to fix it.
                  3) if you're going to ask about jams include the jam code.
                  4) if you're going to ask about an error code include the error code.
                  5) You are the person onsite. Only you can make observations.

                  blackcat: Master Of The Obvious =^..^=

                    Comment

                    • Hose1cook
                      Defective Technician

                      50+ Posts
                      • Jun 2008
                      • 80
                      #6
                      Stratos? What models are these? Thanks

                        Comment

                        • blackcat4866
                          Master Of The Obvious

                          Site Contributor
                          10,000+ Posts
                          • Jul 2007
                          • 22973
                          #7
                          KM-2540, KM-3040, KM-2650, kKM-3060. =^..^=
                          Last edited by blackcat4866; 11-06-2008, 07:45 PM.
                          If you'd like a serious answer to your request:
                          1) demonstrate that you've read the manual
                          2) demonstrate that you made some attempt to fix it.
                          3) if you're going to ask about jams include the jam code.
                          4) if you're going to ask about an error code include the error code.
                          5) You are the person onsite. Only you can make observations.

                          blackcat: Master Of The Obvious =^..^=

                            Comment

                            • Hose1cook
                              Defective Technician

                              50+ Posts
                              • Jun 2008
                              • 80
                              #8
                              OK Thanks, did not know that. Have to say, I'm not liking them too much, lots of electronic problems and those DF-670's leave a lot to be desired.

                                Comment

                                • Jimbo1
                                  Senior Tech

                                  500+ Posts
                                  • Mar 2008
                                  • 845
                                  #9
                                  I just picked up my cert on the Stratos.

                                  I didn't like when they went from Falcon 2 to 3 the silliness where they made it a little moe difficult to network.

                                  The Falcon II is a breeze.
                                  "Some days you get the bear, some days the bear gets you."

                                  Cdr. William Riker

                                    Comment

                                    • Metalvoc
                                      Trusted Tech

                                      100+ Posts
                                      • Sep 2008
                                      • 155
                                      #10
                                      I kind of like the new silliness. It was a bit difficult to pick up at first, especially if you were used to networking the 2s, but the new system is a lot more versatile in it's networking capabilities.
                                      I must have a prodigious quantity of mind; it takes me as much as a week sometimes to make it up - Mark Twain

                                        Comment

                                        Previous template Next
                                        Working...