Kyocera P-6035 K drum unit

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • blackcat4866
    replied
    Re: Kyocera P-6035 K drum unit

    We'll have no way of knowing. =^..^=

    Leave a comment:


  • floody
    replied
    Re: Kyocera P-6035 K drum unit

    what would you think would cause the arcing? the machine in clean, I cant see any lose or damaged contacts or connecters

    Leave a comment:


  • Phil B.
    replied
    Re: Kyocera P-6035 K drum unit

    Originally posted by floody
    the K drum has done less then 500 prints in the past 2 years, to me it looks like toner has stuck to the charge roller and while its not been used its welded itself to the drum.
    no I think BlackCat is more on the right track... voltage arcing is more likely.

    Leave a comment:


  • floody
    replied
    Re: Kyocera P-6035 K drum unit

    the K drum has done less then 500 prints in the past 2 years, to me it looks like toner has stuck to the charge roller and while its not been used its welded itself to the drum.

    Leave a comment:


  • blackcat4866
    replied
    Re: Kyocera P-6035 K drum unit

    Wow! That's really nice!

    i've seen plenty of those crossfeed bars , but never was the primary melted to the drum. I thing it's reasonable to presume that you have some acing going on.

    I hope that you going to change the black drum and developing unit, then calibrate.
    =^..^=

    Leave a comment:


  • floody
    replied
    Re: Kyocera P-6035 K drum unit

    PCU.jpgCharge Roller.jpgPrint Out.jpg

    Leave a comment:


  • floody
    started a topic Kyocera P-6035 K drum unit

    Kyocera P-6035 K drum unit

    Hi all

    I visited a Kyocera P-6035cdn was getting no image, so I removed all the drum units and it looks like the K charge roller as melted to the PCU and managed to free itself off pulling the PCU off the drum at the same time, I will try post some pictures shortly, just wondering has anyone else had this problem?


    cheers
Working...