Search Result
Collapse
27 results in 0.0210 seconds.
Keywords
Members
Tags
-
JasonSBE started a topic workcentre 7545 not pulling from tray 1, giving message that tray 2 cannot be usedin Xeroxworkcentre 7545 not pulling from tray 1, giving message that tray 2 cannot be used
Hi, all. I don't do a lot with Xerox products, so I'm not sure if there are known issues with this series. It seems as though tray 2 is not lifting,... -
Sharp MX5071 is pulling Cyan Developer Material
Hello everyone. I have one MX5071 pulling cyan developer material to the point where it is completely gone describing the image and the material itself.... -
MX3050 and newer electrical connectors
I have a silly question regarding the 2 wire connectors on these models that go to the paper lift motors and the clutches. I have a hard time releasing... -
306ci Reset Firmware
Has anyone figured out how to get the 306ci/356ci reset firmware to work ? The instructions are horrible. I have one that has U465 at 173 for Magenta... -
MX6070N blk pulling developer
I checked this post out. https://www.copytechnet.com/forums/s...9=#post1678624
... -
Xerox 7845 ADF Jamming zfold
Replaced feed sep kit.
Cleaned all rollers and sensors.
Appears that it may be pulling in skewed. See above link to...Last edited by buzz; 02-06-2021, 09:02 AM. -
MPC8002 pulling two sheets
okay the solution to the doc feeder on the mpc 8002 pulling two sheets only when feeding 2-3-4-pieces of paper is this
see photos, i dont know what... -
Canon ImageRunner C5235 pulling double pages
Hi guys,
Issue still remains after replacing all separation, pick up and feed rollers or changing trays. We only use Hammermill 32LB gloss... -
MXB455w pulling zeroconf IP address
I’ve got an MXB455w that is pulling a zeroconfig IP address, such as 169.xxx.xxx.xxx(zeroconf), whenever it is power cycled. It is set for static...Last edited by mttech; 09-05-2018, 04:36 PM. -
Will a C830DN toner pump work in a MPC3002?
hi
I am picking up a used c830dn wth low meter to part out.
Drum,dev units,transfer unit,fuser and figured the toner pumps must be the same.... -
Kyocera P-6035 K drum unit
Hi all
I visited a Kyocera P-6035cdn was getting no image, so I removed all the drum units and it looks like the K charge roller as melted... -
kfs frustrating lately
Anybody else notice KFS having great difficulty the last few days with pulling reports, pulling maintenance mode info, or getting any info from machines?... -
UGWportal
Anyone else having issues pulling the copy counts on the UGWportal lately? Tried FF/Chrome/IE8/9/10 and cannot get our customers to show up under sea... -
e203s pulling dv ???
I have a few of these e203s machines out, a couple of them are either pulling or leaking DV on the front frame side... Brand new machines less than 10k,... -
Toshiba ES 455 buckling paper
I have a ES 455 with an LCF that is buckling the paper about 5 cm from the leading edge. It only does it when pulling from the LCF and the buckle is...