DP-7100 on TA 5052 broken lifter plate.

[Kyo fan]

Re: DP-7100 on TA 5052 broken lifter plate.

lift guide.jpg

[Ropariva]

Re: DP-7100 on TA 5052 broken lifter plate.

Hi all,

Found this part broken, is this a common issue as I a look after a lot of these xx52 models?
Is it a quick job to replace?

Thanks.



[ATTACH=CONFIG]40888[/ATTACH]

Updated part number has the pad as well
303R707021 GUIDE LIFT.

[George J]

Re: DP-7100 on TA 5052 broken lifter plate.

It's a somewhat common fault. There's an updated part that replaces that piece with a metal hinge. The hinge and the guide plate are a separate part though. There should be a bulletin about it.

[copier tech]

Re: DP-7100 on TA 5052 broken lifter plate.

Thanks, maybe i'll carry one in the van

[kola28]

Re: DP-7100 on TA 5052 broken lifter plate.

yup,it's a common issue on DP-7100.

it take about 30-45mins to replace

[Has Been]

Re: DP-7100 on TA 5052 broken lifter plate.

Hi all,

Found this part broken, is this a common issue as I a look after a lot of these xx52 models?
Is it a quick job to replace?

Thanks.



[ATTACH=CONFIG]40888[/ATTACH]

Yes, getting more frequent.

[copier tech]

Hi all,

Found this part broken, is this a common issue as I a look after a lot of these xx52 models?
Is it a quick job to replace?

Thanks.



21516812-1AD9-4E0B-8D3E-7B3DC7F75B74.jpg