KM 3060 black screen

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • adel_nathan
    Trusted Tech
    • Jul 2011
    • 100
    #1

    [Dead] KM 3060 black screen

    hi every body
    i have M/C Kyocera KM3060 give black screen
    i turn it off and on again no change
    check the boat dim and ram chip , also not working
    any other Idea ?
    please help
    thanks
    Tags: black, chip, dim, screen
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22703
      #2
      Re: KM 3060 black screen

      I think I'd probably start with firmware. Since the screen is blank you'd best wait a full hour to be sure that the firmware finishes.

      If that doesn't work I'd do the dip switch op panel reset.

      Depending on what version operation panel PWB, it may have a separate DIMM or it may be integrated. If the DIMM is separate you can try changing the DIMM separately. If it's not separate you'll have to replace the whole operation panel PWB, then firmware.

      If that doesn't work, you might have a bad main DIMM or main controller (and firmware).

      There are many possibilities. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        Previous template Next
        Working...