Kyocera 6052ci 7620 7611 7614 7613

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • fishleg
    Trusted Tech

    Site Contributor
    250+ Posts
    • Mar 2009
    • 426
    #16
    Re: Kyocera 6052ci 7620 7611 7614 7613

    Originally posted by KYO_OEM
    We created door switch set by 3D printer
    See enclosed picture for all 4 locations.
    Optical sensor for switch 2 is located on the left side behind the "A1".(It was easier to block "A1" by using the right position)
    [ATTACH=CONFIG]48596[/ATTACH]
    Wow love that you 3d printed parts to fool the machine. Weird it doesn't just let you do it anyway but suppose someone would jam there hand in the fuser to see if its turning..

      Comment

      • blackcat4866
        Master Of The Obvious

        Site Contributor
        10,000+ Posts
        • Jul 2007
        • 22973
        #17
        Re: Kyocera 6052ci 7620 7611 7614 7613

        Originally posted by KYO_OEM
        We created door switch set by 3D printer
        See enclosed picture for all 4 locations.
        Optical sensor for switch 2 is located on the left side behind the "A1".(It was easier to block "A1" by using the right position)
        [ATTACH=CONFIG]48596[/ATTACH]
        Can you get a few close-ups of the interlock devices? I think I could make something up.
        =^..^=
        If you'd like a serious answer to your request:
        1) demonstrate that you've read the manual
        2) demonstrate that you made some attempt to fix it.
        3) if you're going to ask about jams include the jam code.
        4) if you're going to ask about an error code include the error code.
        5) You are the person onsite. Only you can make observations.

        blackcat: Master Of The Obvious =^..^=

          Comment

          • KYO_OEM
            Senior Tech

            500+ Posts
            • Aug 2011
            • 703
            #18
            Re: Kyocera 6052ci 7620 7611 7614 7613

            Now i created short explanation....
            You also can use pieces of paper or else and tape for blocking the parts.
            Special keys normally not needed. (but easier...)
            Please share
            Attached Files

              Comment

              • KYO_OEM
                Senior Tech

                500+ Posts
                • Aug 2011
                • 703
                #19
                Re: Kyocera 6052ci 7620 7611 7614 7613

                i added additional page with pictures from the keys to the explanation
                Attached Files

                  Comment

                  Previous 1 2 template Next
                  Working...