Good Day i counter a problem fuser section specially in fuser film to this Model,its there any modification to the fuser from fuser film to fuser roller or any mod.to the Set?
-
ERROR HELP ME AND HELP YOU -
None that work. Check with your local Kyocera support and see if there is an extended warranty offered on this model. It may be cheaper to buy a new P2040 printer than buying a fuser. -
I just take out the cloth from inside the fixing film and put it together like it was a Canon or HP. Provided the film isn't trashed I have saved many using this method. You will need high temperature grease, I use Krytox, there are many. I won't go into taking apart and all that. Any competent tech will be able to figure it out.Comment
Comment