Kyocera km 5050 error program loading and cfb 31

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • COPIERTEC ASSOCIATES
    Trusted Tech

    250+ Posts
    • Aug 2011
    • 279
    #1

    Kyocera km 5050 error program loading and cfb 31

    Hello guys i have the above machine with weired error programe loading and after some time error CFB 31 pops
    Tags: None
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 23008
      #2
      Would your customer be printing webpages directly out of the browser? That is a common outcome. A workaround is to save that webpage as a PDF, then print the PDF. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • Tonerkiller
          Senior Tech

          500+ Posts
          • Oct 2012
          • 668
          #3
          Is that a 20 year old machine? Is that a falcon 3? If it is there was a dim under the control panel that can be the issue. Need reseated of replaced. I thing the writing on them needed to be in yellow?
            👍 1

            Comment

            • Munter
              Member

              Site Contributor
              • Jul 2011
              • 23
              #4
              Originally posted by blackcat4866
              Would your customer be printing webpages directly out of the browser? That is a common outcome. A workaround is to save that webpage as a PDF, then print the PDF. =^..^=
              Also advisable to "print as image" to stop any errant coding getting through.

                Comment

                • PrintWhisperer
                  Trusted Tech

                  250+ Posts
                  • Feb 2018
                  • 472
                  #5
                  Originally posted by Tonerkiller
                  Is that a 20 year old machine? Is that a falcon 3? If it is there was a dim under the control panel that can be the issue. Need reseated of replaced. I thing the writing on them needed to be in yellow?
                  Spot on!

                  I read the model and that code....and that stupid chip flashed in my mind. Thin gold plating on the contacts of early production chips.
                  "Being ignorant is not so much a shame, as being unwilling to learn" - Benjamin Franklin

                    Comment

                    • kyotechnz
                      Trusted Tech

                      100+ Posts
                      • Mar 2019
                      • 145
                      #6
                      Or it is time to put on your salesmen hat and upgrade them.

                        Comment

                        Previous template Next
                        Working...