Kyocera M5526cdn problem with printing

[Tsakirtas]

Re: Kyocera M5526cdn problem with printing

Hi Ropariva,

Thank you for your answer.
The toners i used for the 7000prints were genuine.
Now i bought compatible toners. (with the price difference i bought also an Oki c532dn, as i need a color laser printer for work).

So you think is transfer belt issue? If this is the issue the problem will return soon. Right?
By writting replacement parts you mean Transfer belt and black drum unit? Other parts?
It is almost impossible to find spare parts in Greece for Kyocera printers. (Also my knowledge is limited).

I will print again tomorrow the same pages to see quality again.

[tsbservice]

Re: Kyocera M5526cdn problem with printing

+1. Likely your issues will be back sooner or later and Yes they mate bad with compatible toner.

[copykat93]

Re: Kyocera M5526cdn problem with printing

Kyocera machines HATE Generic or Compatible toners.. Unless you completely clean out what ever aftermarket toner you have installed, it is likely that the issue will rear it's ugly head very soon. I would not change the transfer belt until you get rid of all the Generic toner and even then, it is still inside each drum unit.. ALWAYS ALWAYS ALWAYS use Genuine OEM Kyocera toners, you think you're saving money? In the long run it will cost you more.

[Tsakirtas]

Re: Kyocera M5526cdn problem with printing

Would it be possible to print copies without problem with a damaged tranfer belt?

The problem appeared after the use of Genuine kyocera toners.
I just bought a set of compatible, because the printer did not work properly.

[tsbservice]

Re: Kyocera M5526cdn problem with printing

Unfortunately you are now in death spiral it will cost a lot. Remember A4 colour any brand is bound to be expensive if you do more than a few colors. Maybe Ricoh A4 are better. KM are decent.

[Ropariva]

Re: Kyocera M5526cdn problem with printing

Would it be possible to print copies without problem with a damaged tranfer belt?

The problem appeared after the use of Genuine kyocera toners.
I just bought a set of compatible, because the printer did not work properly.

[Ropariva]

Re: Kyocera M5526cdn problem with printing

Would it be possible to print copies without problem with a damaged tranfer belt?

The problem appeared after the use of Genuine kyocera toners.
I just bought a set of compatible, because the printer did not work properly.

PS. I also hate generic toners with a passion, but this issue can and does also occur with genuine.

[blackcat4866]

Re: Kyocera M5526cdn problem with printing

There have been updates to the primary transfer belt unit. If this is the original one, it's common to have belt cleaning issues.
=^..^=