taskalfa 3501i

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Gab
    Senior Tech
    • Aug 2015
    • 666
    #1

    taskalfa 3501i

    When make a copy the first page is ok the second few dark lines , third page has a lot of wider dark lines.
    The lines are not look from drum .Charge roller is new ,Performed dev initialazation, drum refresh ,calibration with no result. Any idea?
    Tags: dark, dev, drum, lines, page
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22973
      #2
      Re: taskalfa 3501i

      samples?
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • Gab
          Senior Tech
          • Aug 2015
          • 666
          #3
          Re: taskalfa 3501i

          Originally posted by Gab
          When make a copy the first page is ok the second few dark lines , third page has a lot of wider dark lines.
          The lines are not look from drum .Charge roller is new ,Performed dev initialazation, drum refresh ,calibration with no result. Any idea?
          Today i had the same problem to an other machine.
          I have noticed that in both machines the toner is almost empty . HAs the problem something to do with this?

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22973
              #4
              Re: taskalfa 3501i

              hmmm, do you have any samples?
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                • Gab
                  Senior Tech
                  • Aug 2015
                  • 666
                  #5
                  Re: taskalfa 3501i

                  Originally posted by blackcat4866
                  hmmm, do you have any samples?
                  Im remembered that 2 months ago i have had the same problem with this exact machine. I replaced developer unit with an other from an other machine and it worked till now
                  In the attached files samples of 1st 2nd and 3nd page
                  Attached Files

                    Comment

                    • copydocinc
                      Trusted Tech

                      Site Contributor
                      250+ Posts
                      • Mar 2015
                      • 263
                      #6
                      Re: taskalfa 3501i

                      It looks like the same problem I have noticed when using compatible toners.
                      You can go to sim 147 and change the mode setting to 0 instead of 1
                      This setting will use less toner
                      or you can change to OEM toners, but maybe you will still need to change mode setting to 0 if the developer
                      unit is contaminated enough from the compatible toner previously

                        Comment

                        Previous template Next
                        Working...