M3040i admin

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • copyman
    Owner / Technician

    Site Contributor
    2,500+ Posts
    • Sep 2005
    • 4575
    #1

    M3040i admin

    Don't know Kyocera that well. When trying to get into admin mode on the web interface page it shows "you cannot login". I used the default user & pass in service manual, 4000-4000. If I try different user / password it comes up "incorrect username or password" so think it's the right user & pass?

    Is it necessary to use web interface to setup printing & scanning or can it be done at the machine without logging in? It pulled an IP address that I used to enter web interface page. If setup can be done from control panel will just do it there?

    Thanks for the help.
    Tags: interface, page, pass, user, web
    • tmaged
      Owner/Service Manager

      Site Contributor
      1,000+ Posts
      • Oct 2008
      • 1863
      #2
      Re: M3040i admin

      You can always run U021 and reset everything. More than likely, you'll need to log in to the web interface to change TLS versions, etc.
      Hope that helps !
      -Tony
      www.dtios.com
      Become a fan on Facebook

        Comment

        • PrintWhisperer
          Trusted Tech

          250+ Posts
          • Feb 2018
          • 454
          #3
          Re: M3040i admin

          Originally posted by copyman
          Don't know Kyocera that well. When trying to get into admin mode on the web interface page it shows "you cannot login". I used the default user & pass in service manual, 4000-4000. If I try different user / password it comes up "incorrect username or password" so think it's the right user & pass?
          You cannot be logged into Service/Maintenance Mode at the device when you are trying to login via the Web interface (CommandCenterRX) Only one chef in the kitchen at a time!

          Originally posted by copyman
          Is it necessary to use web interface to setup printing & scanning or can it be done at the machine without logging in? It pulled an IP address that I used to enter web interface page. If setup can be done from control panel will just do it there?
          You always start with the Operation Panel->System Menu for the basic TCP/IP setting (static or dhcp reservation). There are some settings you cannot access from System Menu on some lines like DNS/Domain if not applied via DHCP and other protocol settings(SMTP/TLS levels) best to use the web interface once the device is connected.
          "Being ignorant is not so much a shame, as being unwilling to learn" - Benjamin Franklin

            Comment

            • copyman
              Owner / Technician

              Site Contributor
              2,500+ Posts
              • Sep 2005
              • 4575
              #4
              Re: M3040i admin

              Thanks for the info, so is 4000-4000 the correct admin user name and password?

                Comment

                • Rpizzle
                  Technician
                  • Mar 2014
                  • 47
                  #5
                  Re: M3040i admin

                  Originally posted by copyman
                  Thanks for the info, so is 4000-4000 the correct admin user name and password?
                  I usually just use Admin Admin. I get mixed up on the numbers frequently.

                    Comment

                    • PrintWhisperer
                      Trusted Tech

                      250+ Posts
                      • Feb 2018
                      • 454
                      #6
                      Re: M3040i admin

                      Originally posted by copyman
                      Thanks for the info, so is 4000-4000 the correct admin user name and password?
                      Originally posted by Rpizzle
                      I usually just use Admin Admin. I get mixed up on the numbers frequently.
                      Both work but the Admin can get a changed password.
                      "Being ignorant is not so much a shame, as being unwilling to learn" - Benjamin Franklin

                        Comment

                        • copyman
                          Owner / Technician

                          Site Contributor
                          2,500+ Posts
                          • Sep 2005
                          • 4575
                          #7
                          Re: M3040i admin

                          Originally posted by Rpizzle
                          I usually just use Admin Admin. I get mixed up on the numbers frequently.
                          Admin - Admin worked! Just to be clear for anyone else that sees this post the "A" is upper case and will not work if lower case is used.

                          Thanks again for the help!

                            Comment

                            Previous template Next
                            Working...