I am new to these machines and having trouble figuring out how to set the Registration correctly. I thought it was in service mode but can't find it anywhere. Any help pointing me in the right direction would be very appreciated.
-
-
Re: Taskalpha 4002i DP Registration
U066 Adjusting the table scanning timing Adjust the lead edge timing for table scanning
U067 Adjusting the table scanning center
line
Adjust the center line for table scanning
U068 DP scanning position adjustment Adjust the starting position for DP scanning
U070 DP magnification adjustment Adjust the magnification for DP scanning
U071 Adjusting the DP leading edge
Timing
Adjust the DP scan timing
U072 Adjusting the DP original center Adjust the center line for DP scanning -
Re: Taskalpha 4002i DP Registration
The way I do it though is to make sure the center for the trays are done first with 034, then the margins 402, then go on to the rest as pointed out by the previous poster. If the trays are not centered ,then you would go all over the place trying to figure out why you are not getting results.THE ONLY THING FOR EVIL TO TRIUMPH IS FOR GOOD MEN TO DO NOTHING..........edmund burkeComment
-
Re: Taskalpha 4002i DP Registration
SP 071 won`t work if SP 075 would set to "ON"
Sorry, wrong system informations, have had it several times for xx54 ci range.
But also helpfull in future i thinkComment
Comment