Ecosys m6635cidn Vertical Black marks

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • EDSNOW
    Trusted Tech

    100+ Posts
    • Feb 2009
    • 187
    #1

    [CQ] Ecosys m6635cidn Vertical Black marks

    I have a MK on order but no ETA
    I am thinking either black drum unit or transfer belt problem.
    Any input always appreciated.
    Sample enclosed.
    Thanks
    Ed in Whitehorse
    Attached Files
    Tags: belt, input, sample, transfer
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 23008
      #2
      Re: Ecosys m6635cidn Vertical Black marks

      It's all about elevated internal temperature, fusing black waste toner to the drum surface. Start by shortening up the sleep timer to 5 minutes. Then replace the black drum. There is a new style black drum, but the sleep setting makes the most difference. All the Mebius, Mebius2, and Gemini machines suffer this ailment.

      https://www.copytechnet.com/forums/k...ml#post2476743

      =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • EDSNOW
          Trusted Tech

          100+ Posts
          • Feb 2009
          • 187
          #3
          Re: Ecosys m6635cidn Vertical Black marks

          Many thanks Blackcat.
          When the MK shows up I will apply your suggestion.
          In the meantime I will adjust the sleep time.
          Best Regards
          Ed

            Comment

            • copykat93
              Trusted Tech

              Site Contributor
              250+ Posts
              • Oct 2021
              • 277
              #4
              Re: Ecosys m6635cidn Vertical Black marks

              Also, there is a new firmware update that adjusts the sleep temp to almost off, Keeps it pretty cool.... The latest F.W. update is dated August 7, 2023 (2V0_S000.004.003)

                Comment

                • EDSNOW
                  Trusted Tech

                  100+ Posts
                  • Feb 2009
                  • 187
                  #5
                  Re: Ecosys m6635cidn Vertical Black marks

                  Originally posted by copykat93
                  Also, there is a new firmware update that adjusts the sleep temp to almost off, Keeps it pretty cool.... The latest F.W. update is dated August 7, 2023 (2V0_S000.004.003)
                  Thanks for the response
                  I will update the firmware as well.
                  Regards

                    Comment

                    • darry1322
                      Senior Tech

                      Site Contributor
                      500+ Posts
                      • Oct 2010
                      • 817
                      #6
                      Re: Ecosys m6635cidn Vertical Black marks

                      Originally posted by EDSNOW
                      Many thanks Blackcat.
                      When the MK shows up I will apply your suggestion.
                      In the meantime I will adjust the sleep time.
                      Best Regards
                      Ed

                      The MK ships with the old style drum so the marks may come back after the MK is installed.

                      If you've done everything already suggested and the marks come back you'll need to swap in the new drum. PN : 302NR93180

                        Comment

                        • EDSNOW
                          Trusted Tech

                          100+ Posts
                          • Feb 2009
                          • 187
                          #7
                          Re: Ecosys m6635cidn Vertical Black marks

                          Originally posted by darry1322
                          The MK ships with the old style drum so the marks may come back after the MK is installed.

                          If you've done everything already suggested and the marks come back you'll need to swap in the new drum. PN : 302NR93180

                          Much appreciated information.
                          Regards

                            Comment

                            • EDSNOW
                              Trusted Tech

                              100+ Posts
                              • Feb 2009
                              • 187
                              #8
                              Re: Ecosys m6635cidn Vertical Black marks

                              Originally posted by EDSNOW
                              Much appreciated information.
                              Regards
                              Just to advise that the M-Kit arrived and is installed. Works well now.
                              Thanks as always to everyone.
                              Have a great day.

                                Comment

                                Previous template Next
                                Working...