Well can't say as I'm impressed with the Taskalfa's I how 2 in the field and have had nothing but trouble with one of them.
Client prints about 20K prints per month in colour, by the
2nd week.. black developed a line from some unidentified piece of plastic that gummed up and ruined the mag roller in the dev unit. (replaced)
3rd week.. Magenta started leaving white lines on page, dev was chocked full of some sort of white foreign matter. (replaced)
4th week.. Yellow starts to fade.. from front to back.. (replaced)
5th week.. After Y dev had been replaced.. Yellow fades out completely.
6th week.. All colours fade with the exception of black. A complete replacement on transfer, devs, and drums. All seems fine.
7th week.. Cyan fades away to nothing.. This is starting to get tired. Kyocera provides a F/W update that might help
8th week.. Replaced all Dev's F/W update and complete reset and recalibrate. Yay problem seems to have been beaten.
9th week.. Normally printed Blue fonts now are printing purple, minor colour and image density problems with cyan at full bleed.
The other machine exibited signs of having problems.. especially in even coming close to the colour desired.. These machines have been a complete disappointment from the beginning.
Has anyone experienced this kind of series of colour problems?
Electrical environment is good, voltage is good, cycle isn't sour..
Temperature and humidity is within spec.
Paper is good.
Just can't get the same output twice on these machines.. it's like Fred Flintstone designed them
Client prints about 20K prints per month in colour, by the
2nd week.. black developed a line from some unidentified piece of plastic that gummed up and ruined the mag roller in the dev unit. (replaced)
3rd week.. Magenta started leaving white lines on page, dev was chocked full of some sort of white foreign matter. (replaced)
4th week.. Yellow starts to fade.. from front to back.. (replaced)
5th week.. After Y dev had been replaced.. Yellow fades out completely.
6th week.. All colours fade with the exception of black. A complete replacement on transfer, devs, and drums. All seems fine.
7th week.. Cyan fades away to nothing.. This is starting to get tired. Kyocera provides a F/W update that might help
8th week.. Replaced all Dev's F/W update and complete reset and recalibrate. Yay problem seems to have been beaten.
9th week.. Normally printed Blue fonts now are printing purple, minor colour and image density problems with cyan at full bleed.
The other machine exibited signs of having problems.. especially in even coming close to the colour desired.. These machines have been a complete disappointment from the beginning.
Has anyone experienced this kind of series of colour problems?
Electrical environment is good, voltage is good, cycle isn't sour..
Temperature and humidity is within spec.
Paper is good.
Just can't get the same output twice on these machines.. it's like Fred Flintstone designed them
Comment