Hello. I'm doing a month-to-month rental with a local company for a Kyocera Taskalfa 3050ci.
I've placed a service request in regards to...
94 results in 0.0483 seconds.
-
Xerox DC260 red and purple are printed more like orange
Hi all,
So what should be like Red or purple is printed more like Orange on my Xerox Docucolor 260.
I did color calibration... -
bizhub c384e color question
ok... got to a client...
color is too red...
after drama... cleaned the idc sensor...
got rid of the redness...
ran the stabilization... -
C353 Bizhub color issue after changing print heads
I had a error code C-4152 which in the manual says I have to change print heads. I changed all four PH and the error code disappeared, but when I ran... -
Sharp MX-C311 color calibration errors
I am working on a sharp MX-C311. The machine had horrible color, so I was running a color calibration on the machine through the steps listed in ADJ2... -
color reset Toshiba 3100c
Hi all,
I could use some info on reseting printer color calibrations, and calibrating the scanner density.
I just picked up a 3100c.... -
TA-250ci Color shift problem
Hello folks,
This machine has a color reg. problem, it appears. The problem only show up if the "media type" is set to anything heaver... -
AR C172M
What is step s of color calibration for this model
i have a copy a redish copy i made prog 50-22 and 46-24 but it is the same
can anyone... -
Taskalfa 300ci pausing during prints
We have a machine that is pausing during its print cycles. Lets say we print 10 copies, it will print 3 or 4 and then pause for up to 20 sec. and the... -
Minimum Call Procedures?
The first time I was sent for training, it was at a company that had 40 full time road techs. The guy who did the training was some sort of manager when... -
MX-3500 mc hangs
Today while doing a new MX-3500N copier installation (as per the inst.procedure,without putting the toner) , Iam not able to enter into simulation to... -
4521
Hi,
I have a big problem with my printer bizhub pro 6500 it gives me an error while perform the color registration adjusment the error is C 4521.So... -
AR-BC320 install transfer assembly message on display
I'm currently working on a AR-BC320 Sharp copier. Theres a message on the display saying install transfer assembly even though the assembly is installed... -
Manually Adjust Colours on a Sharp MX2600?
I know that you can go into Printer Defaults > Color > Color Adjustment and do it there, by by so doing you disable the Postscript driver functionalities.... -
MX-7001N Printing Issues
I have a strange issue, on print only it goes into automatic callibration about every 2 or 3 prints and started right after a paper jam in the fuser?...
