km 6030 jam 70

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • cmpelser
    Trusted Tech
    • Jan 2008
    • 173

    #1

    km 6030 jam 70

    hi guys.

    I have a km-6030 giving me problems...

    If I put a single page into the document processor it feeds it through fine, and makes the copy...
    but then it seems to try feed more originals that arent there causing jam 70.
    It seems like the machine still thinks that there are still originals to be copied.
    This doesnt happen all the time but its getting worse and happening about 80% of the time now.
    I have cleaned all the sensors but it makes no difference.

    Anyone had this before?
  • blackcat4866
    Master Of The Obvious

    Site Contributor
    10,000+ Posts
    • Jul 2007
    • 22929

    #2
    I'd start by testing out the sensors in simulation U244, sensor OFSW (Original Feed SWitch). Also, in simulation U243, test the OFM (Original Feed Motor). =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

    Comment

    • JustManuals
      Field Supervisor

      5,000+ Posts
      • Jan 2006
      • 9838

      #3
      This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment from The Internet's largest collection of manuals


      Paul@justmanuals.com

      Comment

      Working...