8030 docu8ment feeder jams

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • lorenrupe
    The Great Land

    50+ Posts
    • Jan 2010
    • 57
    #1

    8030 docu8ment feeder jams

    I have an 8030 that will intermitently throw a jam 76. It will be running along fine and then all of a sudden the second feed motor that drives the big rollers around the corner to the document glass will stop while the motor right in front of it keeps driving. They are the same motors so I switched them but still get the same thing so it is not the motor.
    Has anyone else seen this problem?
    Loren Rupe
    Valley Business Machines Inc.
    Tags: document, feed, feeder, feeders, front, front cover, glass, gummed, intermitently, jam, jams, motor, stop, sudden
    • Jamiesdad2
      Technician
      • May 2009
      • 29
      #2
      Clean the bushings for the large roller and all of the idle pulleys under the feeders front cover. Alot of paper dust and gunk build up and those motors aren't strong enough to drive thhe roller.

        Comment

        • lorenrupe
          The Great Land

          50+ Posts
          • Jan 2010
          • 57
          #3
          Yes that was the problem, I had just started going thru everything that this motor was driving and someone had also put some oil on some of those front drive gear and pulley shafts and they were all gummed up! Thanks for the reply!
          Loren Rupe
          Valley Business Machines Inc.

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22997
              #4
              That's good to know. Thanks guys. =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                Previous template Next
                Working...