kmc 3225

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Tebow83
    Technician

    50+ Posts
    • May 2009
    • 92
    #1

    kmc 3225

    hey guys,

    does anyone know what the fuser life is on the km c3225?? I have one creasing the paper. Just want to be sure before i order.

    Thanks in advance.
    Tags: 225, 322, 3225, advance, c322, c3225, creasing, damaging, fuser, life, paper, registration roller
    • Jules Winfield
      Senior Tech

      500+ Posts
      • Jul 2009
      • 821
      #2
      Fusers on that machine are rated for 300K.
      But I'm trying, Ringo. I'm trying real hard... to be the Shepherd.

        Comment

        • randula7
          Technician

          50+ Posts
          • Nov 2007
          • 73
          #3
          300K.but its can be damage befor.I have km-c2525/3232
          2 units flat spotted.making noice dok,dok since instalation date and 2 units broken.you can claim warranty.

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22999
              #4
              The fuser is the usual cause for wrinkling, but I've seen another cause on the Saturn series that may apply to your situation.

              I've got a real estate office that was printing hundreds of pages of labels from tray #1. Miraculously, they managed to remove the various peeled-off labels without damaging the primary transfer belt or the plastic guides. There was a lot of adhesive on the pre-registration guides and registration roller. The pre-registration mylar on the door side was wrinkled pretty badly at the machine rear. And the pre-registration mylar below the registration roller was flipped under the roller. The end result was extensive wrinkling at the registration roller, before imaging. So if you pull open the wrinkles there is no image inside. Wrinkles from the fuser will have image inside the wrinkles. =^..^=
              Last edited by blackcat4866; 11-25-2010, 12:49 AM.
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                • Tebow83
                  Technician

                  50+ Posts
                  • May 2009
                  • 92
                  #5
                  Thanks guys, new fuser did the job. Very pricey fuser though.

                    Comment

                    Previous template Next
                    Working...