Hi ,
We have a customer with a KM-8030 ,they have already made more than 4.000.000 prints.
the machine works fine but there is one big issue.
We have replaced the laser unit (LK-650B) 7 times, because c4200 en C4120 codes.(resetting no possible)
When I replaced the LK ,I set the 3 values in U472 ,then everyting looks fine an after a couple of months (2-8) the errorcodes are coming back.
Every suggestion is welcome
We have a customer with a KM-8030 ,they have already made more than 4.000.000 prints.
the machine works fine but there is one big issue.
We have replaced the laser unit (LK-650B) 7 times, because c4200 en C4120 codes.(resetting no possible)
When I replaced the LK ,I set the 3 values in U472 ,then everyting looks fine an after a couple of months (2-8) the errorcodes are coming back.
Every suggestion is welcome
Comment