rollers for pf 750

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • spokc
    Technician
    • Jan 2009
    • 35
    #1

    rollers for pf 750

    in the parts book i see the sep roller but i don't see the feed roller,the roller that is right above the sep roller
    does any one know the part number
    also is there a part number for the entire feed unit of the pf 750 mine has over a million feeds and i would like to just replace the whole thing
    thanks
    Tags: None
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22999
      #2
      Re: rollers for pf 750

      (2) 5A707600 Pickup Roller (1 ea)
      (1) 5FH06010 Feed Roller (total 1)
      (1) 5FH06020 Separation Roller (total 1)
      (1) 54106150 Separation Torque Limiter Rear Hub
      (1) 5A707670 Separation Torque Limiter Spring, Greasable
      (1) 54106170 Separation Torque Limiter Sleeve
      (1) 5A707620 Separation Torque Limiter Front Hub
      (2) 5A707640 Separation Spring (1 ea)
      (4) 305A707971 Feed Clutches

      At 1M prints I would replace these items:

      =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • spokc
          Technician
          • Jan 2009
          • 35
          #3
          Re: rollers for pf 750

          thanks is there a part number available for the entire feed unit
          it would seem more efficient to replace the entire unit as opposed
          to putting all those individual parts int the old unit

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22999
              #4
              Re: rollers for pf 750

              No assembly number listed. Even so, I doubt it would save you any money.

              Watch that the plastic tabs are not broken:
              http://www.copytechnet.com/forums/ky...-pf-750-a.html


              =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                • spokc
                  Technician
                  • Jan 2009
                  • 35
                  #5
                  Re: rollers for pf 750

                  thanks for you assistance what plastic tabs are you refering to?
                  time is the money i like to save and a new unit would be a million
                  prints better than an old one if it was available.

                    Comment

                    • GESPAGE
                      Technician
                      • May 2011
                      • 40
                      #6
                      Re: rollers for pf 750

                      Originally posted by spokc
                      thanks for you assistance what plastic tabs are you refering to?
                      time is the money i like to save and a new unit would be a million
                      prints better than an old one if it was available.
                      hello, check
                      Attached Files

                        Comment

                        Previous template Next
                        Working...