If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
The last thing I did there was watch the machine.
I made some copy and a print job printed. It sat there not doing anything
for 30mins. Then it coded out. Next I disconnected the network cable.
30min later no code. I'm going back to see if I can repeat this.
Could it be it something on the network? I have an MP6002 that coded out with
a different code when someone tried to print from the internet using Explore.
The customer is having money problems and has to wait to make
repairs.
And recently I was there to look at a different unit. The power supply on this one is not working.
And they will have to wait for this one also.
Comment