MP 4001 SC995 ERROR

[tnelson]

Re: MP 4001 SC995 ERROR

i agree, betting its not the correct controller. if the part# isn't D092-5724 you've got the wrong one! nothing you do will change the 995 code.

[logrady2331]

Re: MP 4001 SC995 ERROR

SC995 means the controller is not the right one. This series is a little complicated on which boards fit what, but I've seen it a ton. Wrong controller.

[Stetner]

Re: MP 4001 SC995 ERROR

RAM from old board should be moved to the new board

Yes I moved all components from old board to replacement board. The Ethernet port works now, so at least that part is fixed lol

[Stetner]

Re: MP 4001 SC995 ERROR

Are you sure you have the right Controller Board? D0925724 is for the MP 4001 and D0925714 is for the MP 5001. The boards are not interchangeable and eBay is no guarantee that you got the right PCB. SC995 will not clear if it is the wrong board.

I do appreciate any help....The only number I can find on the original board is D0925103B & the same number on replacement is 0855300J Every component and chip on both boards is identical

[Stetner]

Re: MP 4001 SC995 ERROR

Now you want to resort to name calling? I'm fine that this forum is not for me....If you don't want to help me that's fine too.
But why do you need to call me a snowflake? How adult of you.

[mbolduc]

Re: MP 4001 SC995 ERROR

RAM from old board should be moved to the new board

[Wild Bill]

Re: MP 4001 SC995 ERROR

What a little snowflake, maybe you need some how chocolate...hmmmmmm?

[Gary Bowen]

Re: MP 4001 SC995 ERROR

Are you sure you have the right Controller Board? D0925724 is for the MP 4001 and D0925714 is for the MP 5001. The boards are not interchangeable and eBay is no guarantee that you got the right PCB. SC995 will not clear if it is the wrong board.

[Stetner]

Re: MP 4001 SC995 ERROR

OK point taken, I'll go elsewhere for answers. Thanks for nothing.

[sturmtrooper]

Re: MP 4001 SC995 ERROR

If everyone's answer on here is to hire a certified tech, then what is the purpose of this forum?

Mostly for techs to help other techs.

[Stetner]

Re: MP 4001 SC995 ERROR

MP4001 is not so old!!!
A certified tech will solve your serial number problem

If everyone's answer on here is to hire a certified tech, then what is the purpose of this forum?

[Stetner]

Re: MP 4001 SC995 ERROR

**Update... I found the info on how to enter the service menu, the serial number did need changed to match the number of the machine.
I changed it and re-formatted the HDD, but the SC995 error is still present.

[tonnerboy]

Re: MP 4001 SC995 ERROR

MP4001 is not so old!!!
A certified tech will solve your serial number problem

[Stetner]

Re: MP 4001 SC995 ERROR

We are located in a rural area, so certified techs are not readily available. This is an old machine no longer covered by a service contract. We would like to
save it from the landfill if possible. I don't have access to the service manual for this machine, and have had little luck finding it online.

[Elmo]

Re: MP 4001 SC995 ERROR

If you read thru the service manual it will explain how to get into service mode
and also the procedure you must follow when replacing boards
i advise you to get help from a qualified tech